Contract Name:
BribeFactoryV3
Contract Source Code:
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/ContextUpgradeable.sol";
import "../proxy/utils/Initializable.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
function __Ownable_init() internal onlyInitializing {
__Ownable_init_unchained();
}
function __Ownable_init_unchained() internal onlyInitializing {
_transferOwnership(_msgSender());
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/
function _checkOwner() internal view virtual {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
/**
* @dev This empty reserved space is put in place to allow future versions to add new
* variables without shifting down storage in the inheritance chain.
* See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
*/
uint256[49] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (proxy/utils/Initializable.sol)
pragma solidity ^0.8.2;
import "../../utils/AddressUpgradeable.sol";
/**
* @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
* behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
* external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
* function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
*
* The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
* reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
* case an upgrade adds a module that needs to be initialized.
*
* For example:
*
* [.hljs-theme-light.nopadding]
* ```
* contract MyToken is ERC20Upgradeable {
* function initialize() initializer public {
* __ERC20_init("MyToken", "MTK");
* }
* }
* contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
* function initializeV2() reinitializer(2) public {
* __ERC20Permit_init("MyToken");
* }
* }
* ```
*
* TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
* possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
*
* CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
* that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
*
* [CAUTION]
* ====
* Avoid leaving a contract uninitialized.
*
* An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
* contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
* the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
*
* [.hljs-theme-light.nopadding]
* ```
* /// @custom:oz-upgrades-unsafe-allow constructor
* constructor() {
* _disableInitializers();
* }
* ```
* ====
*/
abstract contract Initializable {
/**
* @dev Indicates that the contract has been initialized.
* @custom:oz-retyped-from bool
*/
uint8 private _initialized;
/**
* @dev Indicates that the contract is in the process of being initialized.
*/
bool private _initializing;
/**
* @dev Triggered when the contract has been initialized or reinitialized.
*/
event Initialized(uint8 version);
/**
* @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
* `onlyInitializing` functions can be used to initialize parent contracts.
*
* Similar to `reinitializer(1)`, except that functions marked with `initializer` can be nested in the context of a
* constructor.
*
* Emits an {Initialized} event.
*/
modifier initializer() {
bool isTopLevelCall = !_initializing;
require(
(isTopLevelCall && _initialized < 1) || (!AddressUpgradeable.isContract(address(this)) && _initialized == 1),
"Initializable: contract is already initialized"
);
_initialized = 1;
if (isTopLevelCall) {
_initializing = true;
}
_;
if (isTopLevelCall) {
_initializing = false;
emit Initialized(1);
}
}
/**
* @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
* contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
* used to initialize parent contracts.
*
* A reinitializer may be used after the original initialization step. This is essential to configure modules that
* are added through upgrades and that require initialization.
*
* When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`
* cannot be nested. If one is invoked in the context of another, execution will revert.
*
* Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
* a contract, executing them in the right order is up to the developer or operator.
*
* WARNING: setting the version to 255 will prevent any future reinitialization.
*
* Emits an {Initialized} event.
*/
modifier reinitializer(uint8 version) {
require(!_initializing && _initialized < version, "Initializable: contract is already initialized");
_initialized = version;
_initializing = true;
_;
_initializing = false;
emit Initialized(version);
}
/**
* @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
* {initializer} and {reinitializer} modifiers, directly or indirectly.
*/
modifier onlyInitializing() {
require(_initializing, "Initializable: contract is not initializing");
_;
}
/**
* @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
* Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
* to any version. It is recommended to use this to lock implementation contracts that are designed to be called
* through proxies.
*
* Emits an {Initialized} event the first time it is successfully executed.
*/
function _disableInitializers() internal virtual {
require(!_initializing, "Initializable: contract is initializing");
if (_initialized < type(uint8).max) {
_initialized = type(uint8).max;
emit Initialized(type(uint8).max);
}
}
/**
* @dev Internal function that returns the initialized version. Returns `_initialized`
*/
function _getInitializedVersion() internal view returns (uint8) {
return _initialized;
}
/**
* @dev Internal function that returns the initialized version. Returns `_initializing`
*/
function _isInitializing() internal view returns (bool) {
return _initializing;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library AddressUpgradeable {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata,
string memory errorMessage
) internal view returns (bytes memory) {
if (success) {
if (returndata.length == 0) {
// only check isContract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
require(isContract(target), "Address: call to non-contract");
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function _revert(bytes memory returndata, string memory errorMessage) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
import "../proxy/utils/Initializable.sol";
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract ContextUpgradeable is Initializable {
function __Context_init() internal onlyInitializing {
}
function __Context_init_unchained() internal onlyInitializing {
}
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
/**
* @dev This empty reserved space is put in place to allow future versions to add new
* variables without shifting down storage in the inheritance chain.
* See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
*/
uint256[50] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/
function _checkOwner() internal view virtual {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (security/ReentrancyGuard.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor() {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and making it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
_nonReentrantBefore();
_;
_nonReentrantAfter();
}
function _nonReentrantBefore() private {
// On the first call to nonReentrant, _status will be _NOT_ENTERED
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
}
function _nonReentrantAfter() private {
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
* https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
*
* Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
* presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
* need to send a transaction, and thus is not required to hold Ether at all.
*/
interface IERC20Permit {
/**
* @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
* given ``owner``'s signed approval.
*
* IMPORTANT: The same issues {IERC20-approve} has related to transaction
* ordering also apply here.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `deadline` must be a timestamp in the future.
* - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
* over the EIP712-formatted function arguments.
* - the signature must use ``owner``'s current nonce (see {nonces}).
*
* For more information on the signature format, see the
* https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
* section].
*/
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
/**
* @dev Returns the current nonce for `owner`. This value must be
* included whenever a signature is generated for {permit}.
*
* Every successful call to {permit} increases ``owner``'s nonce by one. This
* prevents a signature from being used multiple times.
*/
function nonces(address owner) external view returns (uint256);
/**
* @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
*/
// solhint-disable-next-line func-name-mixedcase
function DOMAIN_SEPARATOR() external view returns (bytes32);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 amount
) external returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/utils/SafeERC20.sol)
pragma solidity ^0.8.0;
import "../IERC20.sol";
import "../extensions/draft-IERC20Permit.sol";
import "../../../utils/Address.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using Address for address;
function safeTransfer(
IERC20 token,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(
IERC20 token,
address from,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(
IERC20 token,
address spender,
uint256 value
) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
require(
(value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
uint256 newAllowance = token.allowance(address(this), spender) + value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
unchecked {
uint256 oldAllowance = token.allowance(address(this), spender);
require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
uint256 newAllowance = oldAllowance - value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
}
function safePermit(
IERC20Permit token,
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) internal {
uint256 nonceBefore = token.nonces(owner);
token.permit(owner, spender, value, deadline, v, r, s);
uint256 nonceAfter = token.nonces(owner);
require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) {
// Return data is optional
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata,
string memory errorMessage
) internal view returns (bytes memory) {
if (success) {
if (returndata.length == 0) {
// only check isContract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
require(isContract(target), "Address: call to non-contract");
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function _revert(bytes memory returndata, string memory errorMessage) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.11;
import "./interfaces/IMinter.sol";
import "./interfaces/IVoter.sol";
import "./interfaces/IVotingEscrow.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import './libraries/Math.sol';
import './libraries/Constants.sol';
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import "@openzeppelin/contracts/security/ReentrancyGuard.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
contract Bribe is ReentrancyGuard {
using SafeERC20 for IERC20;
uint256 public firstBribeTimestamp;
/* ========== STATE VARIABLES ========== */
struct Reward {
uint256 periodFinish;
uint256 rewardsPerEpoch;
uint256 lastUpdateTime;
}
mapping(address => mapping(uint => Reward)) public rewardData; // token -> startTimestamp -> Reward
mapping(address => bool) public isRewardToken;
address[] public rewardTokens;
address public voter;
address public bribeFactory;
address public minter;
address public ve;
address public owner;
string public TYPE;
// owner -> reward token -> lastTime
mapping(address => mapping(address => uint256)) public userRewardPerTokenPaid;
mapping(address => mapping(address => uint256)) public userTimestamp;
//uint256 private _totalSupply;
mapping(uint256 => uint256) public _totalSupply;
mapping(address => mapping(uint256 => uint256)) private _balances; //owner -> timestamp -> amount
event RewardTokenAdded(address indexed bribesAddress, address indexed newRewardToken);
/* ========== CONSTRUCTOR ========== */
constructor(address _owner,address _voter,address _bribeFactory, string memory _type) {
require(_bribeFactory != address(0) && _voter != address(0) && _owner != address(0));
voter = _voter;
bribeFactory = _bribeFactory;
firstBribeTimestamp = 0;
ve = IVoter(_voter)._ve();
minter = IVoter(_voter).minter();
require(minter != address(0));
owner = _owner;
TYPE = _type;
}
/// @notice get the current epoch
function getEpochStart() public view returns(uint){
return IMinter(minter).active_period();
}
/// @notice get next epoch (where bribes are saved)
function getNextEpochStart() public view returns(uint){
return getEpochStart() + Constants.EPOCH_LENGTH;
}
/* ========== VIEWS ========== */
/// @notice get the length of the reward tokens
function rewardsListLength() external view returns(uint256) {
return rewardTokens.length;
}
/// @notice get the last totalSupply (total votes for a pool)
function totalSupply() external view returns (uint256) {
uint256 _timestamp = getNextEpochStart();
return _totalSupply[_timestamp];
}
/// @notice get a totalSupply given a timestamp
function totalSupplyAt(uint256 _timestamp) external view returns (uint256) {
return _totalSupply[_timestamp];
}
/// @notice read the balanceOf the tokenId at a given timestamp
function balanceOfAt(uint256 tokenId, uint256 _timestamp) public view returns (uint256) {
address _owner = IVotingEscrow(ve).ownerOf(tokenId);
return _balances[_owner][_timestamp];
}
/// @notice get last deposit available given a tokenID
function balanceOf(uint256 tokenId) public view returns (uint256) {
uint256 _timestamp = getNextEpochStart();
address _owner = IVotingEscrow(ve).ownerOf(tokenId);
return _balances[_owner][_timestamp];
}
/// @notice get the balance of a owner in the current epoch
function balanceOfOwner(address _owner) public view returns (uint256) {
uint256 _timestamp = getNextEpochStart();
return _balances[_owner][_timestamp];
}
/// @notice get the balance of a owner given a timestamp
function balanceOfOwnerAt(address _owner, uint256 _timestamp) public view returns (uint256) {
return _balances[_owner][_timestamp];
}
/// @notice Read earned amount given a tokenID and _rewardToken
function earned(uint256 tokenId, address _rewardToken) public view returns(uint256){
uint k = 0;
uint reward = 0;
uint256 _endTimestamp = IMinter(minter).active_period(); // claim until current epoch
address _owner = IVotingEscrow(ve).ownerOf(tokenId);
uint256 _userLastTime = userTimestamp[_owner][_rewardToken];
if(_endTimestamp == _userLastTime){
return 0;
}
// if user first time then set it to first bribe - week to avoid any timestamp problem
if(_userLastTime < firstBribeTimestamp){
_userLastTime = firstBribeTimestamp - Constants.EPOCH_LENGTH;
}
for(k; k < 50; k++){
if(_userLastTime == _endTimestamp){
// if we reach the current epoch, exit
break;
}
reward += _earned(_owner, _rewardToken, _userLastTime);
_userLastTime += Constants.EPOCH_LENGTH;
}
return reward;
}
/// @notice read earned amounts given an address and the reward token
function earned(address _owner, address _rewardToken) public view returns(uint256){
uint k = 0;
uint reward = 0;
uint256 _endTimestamp = IMinter(minter).active_period(); // claim until current epoch
uint256 _userLastTime = userTimestamp[_owner][_rewardToken];
if(_endTimestamp == _userLastTime){
return 0;
}
// if user first time then set it to first bribe - week to avoid any timestamp problem
if(_userLastTime < firstBribeTimestamp){
_userLastTime = firstBribeTimestamp - Constants.EPOCH_LENGTH;
}
for(k; k < 50; k++){
if(_userLastTime == _endTimestamp){
// if we reach the current epoch, exit
break;
}
reward += _earned(_owner, _rewardToken, _userLastTime);
_userLastTime += Constants.EPOCH_LENGTH;
}
return reward;
}
/// @notice Read earned amount given address and reward token, returns the rewards and the last user timestamp (used in case user do not claim since 50+epochs)
function earnedWithTimestamp(address _owner, address _rewardToken) private view returns(uint256,uint256){
uint k = 0;
uint reward = 0;
uint256 _endTimestamp = IMinter(minter).active_period(); // claim until current epoch
uint256 _userLastTime = userTimestamp[_owner][_rewardToken];
if(_endTimestamp == _userLastTime){
return (0, _userLastTime);
}
// if user first time then set it to first bribe - week to avoid any timestamp problem
if(_userLastTime < firstBribeTimestamp){
_userLastTime = firstBribeTimestamp - Constants.EPOCH_LENGTH;
}
for(k; k < 50; k++){
if(_userLastTime == _endTimestamp){
// if we reach the current epoch, exit
break;
}
reward += _earned(_owner, _rewardToken, _userLastTime);
_userLastTime += Constants.EPOCH_LENGTH;
}
return (reward, _userLastTime);
}
/// @notice get the earned rewards
function _earned(address _owner, address _rewardToken, uint256 _timestamp) internal view returns (uint256) {
uint256 _balance = balanceOfOwnerAt(_owner, _timestamp);
if(_balance == 0){
return 0;
} else {
uint256 _rewardPerToken = rewardPerToken(_rewardToken, _timestamp);
uint256 _rewards = _rewardPerToken * _balance / 1e24;
return _rewards;
}
}
/// @notice get the rewards for token
function rewardPerToken(address _rewardsToken, uint256 _timestamp) public view returns (uint256) {
if (_totalSupply[_timestamp] == 0) {
return rewardData[_rewardsToken][_timestamp].rewardsPerEpoch;
}
return rewardData[_rewardsToken][_timestamp].rewardsPerEpoch * 1e24 / _totalSupply[_timestamp];
}
/* ========== MUTATIVE FUNCTIONS ========== */
/// @notice User votes deposit
/// @dev called on voter.vote() or voter.poke()
/// we save into owner "address" and not "tokenID".
/// Owner must reset before transferring token
function _deposit(uint256 amount, uint256 tokenId) external nonReentrant {
require(amount > 0, "Cannot stake 0");
require(msg.sender == voter);
uint256 active_period = IMinter(minter).active_period();
require(active_period != 0, "Not started epochs");
uint256 _startTimestamp = active_period + Constants.EPOCH_LENGTH;
uint256 _oldSupply = _totalSupply[_startTimestamp];
address _owner = IVotingEscrow(ve).ownerOf(tokenId);
uint256 _lastBalance = _balances[_owner][_startTimestamp];
_totalSupply[_startTimestamp] = _oldSupply + amount;
_balances[_owner][_startTimestamp] = _lastBalance + amount;
emit Staked(tokenId, amount);
}
/// @notice User votes withdrawal
/// @dev called on voter.reset()
function _withdraw(uint256 amount, uint256 tokenId) public nonReentrant {
require(amount > 0, "Cannot withdraw 0");
require(msg.sender == voter);
uint256 active_period = IMinter(minter).active_period();
require(active_period != 0, "Not started epochs");
uint256 _startTimestamp = active_period + Constants.EPOCH_LENGTH;
address _owner = IVotingEscrow(ve).ownerOf(tokenId);
// incase of bribe contract reset in gauge proxy
if (amount <= _balances[_owner][_startTimestamp]) {
uint256 _oldSupply = _totalSupply[_startTimestamp];
uint256 _oldBalance = _balances[_owner][_startTimestamp];
_totalSupply[_startTimestamp] = _oldSupply - amount;
_balances[_owner][_startTimestamp] = _oldBalance - amount;
emit Withdrawn(tokenId, amount);
}
}
/// @notice Claim the TOKENID rewards
function getReward(uint tokenId, address[] memory tokens) external nonReentrant {
require(IVotingEscrow(ve).isApprovedOrOwner(msg.sender, tokenId));
uint256 _userLastTime;
uint256 reward = 0;
address _owner = IVotingEscrow(ve).ownerOf(tokenId);
for (uint256 i = 0; i < tokens.length; i++) {
address _rewardToken = tokens[i];
(reward, _userLastTime) = earnedWithTimestamp(_owner, _rewardToken);
if (reward > 0) {
IERC20(_rewardToken).safeTransfer(_owner, reward);
emit RewardPaid(_owner, _rewardToken, reward);
}
userTimestamp[_owner][_rewardToken] = _userLastTime;
}
}
/// @notice Claim the rewards given msg.sender
function getReward(address[] memory tokens) external nonReentrant {
uint256 _userLastTime;
uint256 reward = 0;
address _owner = msg.sender;
for (uint256 i = 0; i < tokens.length; i++) {
address _rewardToken = tokens[i];
(reward, _userLastTime) = earnedWithTimestamp(_owner, _rewardToken);
if (reward > 0) {
IERC20(_rewardToken).safeTransfer(_owner, reward);
emit RewardPaid(_owner, _rewardToken, reward);
}
userTimestamp[_owner][_rewardToken] = _userLastTime;
}
}
/// @notice Claim rewards from voter
function getRewardForOwner(uint tokenId, address[] memory tokens) public nonReentrant {
require(msg.sender == voter);
uint256 _userLastTime;
uint256 reward = 0;
address _owner = IVotingEscrow(ve).ownerOf(tokenId);
for (uint256 i = 0; i < tokens.length; i++) {
address _rewardToken = tokens[i];
(reward, _userLastTime) = earnedWithTimestamp(_owner, _rewardToken);
if (reward > 0) {
IERC20(_rewardToken).safeTransfer(_owner, reward);
emit RewardPaid(_owner, _rewardToken, reward);
}
userTimestamp[_owner][_rewardToken] = _userLastTime;
}
}
/// @notice Claim rewards from voter
function getRewardForAddress(address _owner, address[] memory tokens) public nonReentrant {
require(msg.sender == voter);
uint256 _userLastTime;
uint256 reward = 0;
for (uint256 i = 0; i < tokens.length; i++) {
address _rewardToken = tokens[i];
(reward, _userLastTime) = earnedWithTimestamp(_owner, _rewardToken);
if (reward > 0) {
IERC20(_rewardToken).safeTransfer(_owner, reward);
emit RewardPaid(_owner, _rewardToken, reward);
}
userTimestamp[_owner][_rewardToken] = _userLastTime;
}
}
/// @notice Notify a bribe amount
/// @dev Rewards are saved into NEXT EPOCH mapping.
function notifyRewardAmount(address _rewardsToken, uint256 reward) external nonReentrant {
require(isRewardToken[_rewardsToken], "reward token not verified");
IERC20(_rewardsToken).safeTransferFrom(msg.sender,address(this),reward);
uint256 active_period = IMinter(minter).active_period();
require(active_period != 0, "Not started epochs");
uint256 _startTimestamp = active_period + Constants.EPOCH_LENGTH; //period points to the current thursday. Bribes are distributed from next epoch (thursday)
if(firstBribeTimestamp == 0){
firstBribeTimestamp = _startTimestamp;
}
uint256 _lastReward = rewardData[_rewardsToken][_startTimestamp].rewardsPerEpoch;
rewardData[_rewardsToken][_startTimestamp].rewardsPerEpoch = _lastReward + reward;
rewardData[_rewardsToken][_startTimestamp].lastUpdateTime = block.timestamp;
rewardData[_rewardsToken][_startTimestamp].periodFinish = _startTimestamp + Constants.EPOCH_LENGTH;
emit RewardAdded(_rewardsToken, reward, _startTimestamp);
}
/* ========== RESTRICTED FUNCTIONS ========== */
/// @notice add rewards tokens
function addRewards(address[] memory _rewardsToken) public onlyAllowed {
uint i = 0;
for(i; i < _rewardsToken.length; i++){
_addReward(_rewardsToken[i]);
}
}
/// @notice add a single reward token
function addReward(address _rewardsToken) public onlyAllowed {
_addReward(_rewardsToken);
}
function _addReward(address _rewardsToken) internal {
if(!isRewardToken[_rewardsToken]){
isRewardToken[_rewardsToken] = true;
rewardTokens.push(_rewardsToken);
emit RewardTokenAdded(address(this), _rewardsToken);
}
}
/// @notice Recover some ERC20 from the contract and updated given bribe
function recoverERC20AndUpdateData(address tokenAddress, uint256 tokenAmount) external onlyAllowed {
require(tokenAmount <= IERC20(tokenAddress).balanceOf(address(this)));
uint256 active_period = IMinter(minter).active_period();
require(active_period != 0, "Not started epochs");
uint256 _startTimestamp = active_period + Constants.EPOCH_LENGTH;
uint256 _lastReward = rewardData[tokenAddress][_startTimestamp].rewardsPerEpoch;
rewardData[tokenAddress][_startTimestamp].rewardsPerEpoch = _lastReward - tokenAmount;
rewardData[tokenAddress][_startTimestamp].lastUpdateTime = block.timestamp;
IERC20(tokenAddress).safeTransfer(owner, tokenAmount);
emit Recovered(tokenAddress, tokenAmount);
}
/// @notice Recover some ERC20 from the contract.
/// @dev Be careful --> if called then getReward() at last epoch will fail because some reward are missing!
/// Think about calling recoverERC20AndUpdateData()
function emergencyRecoverERC20(address tokenAddress, uint256 tokenAmount) external onlyAllowed {
require(tokenAmount <= IERC20(tokenAddress).balanceOf(address(this)));
IERC20(tokenAddress).safeTransfer(owner, tokenAmount);
emit Recovered(tokenAddress, tokenAmount);
}
/// @notice Set a new voter
function setVoter(address _Voter) external onlyAllowed {
require(_Voter != address(0));
voter = _Voter;
}
/// @notice Set a new minter
function setMinter(address _minter) external onlyAllowed {
require(_minter != address(0));
minter = _minter;
}
/// @notice Set a new Owner
function setOwner(address _owner) external onlyAllowed {
require(_owner != address(0));
owner = _owner;
}
/* ========== MODIFIERS ========== */
modifier onlyAllowed() {
require( (msg.sender == owner || msg.sender == bribeFactory), "permission is denied!" );
_;
}
/* ========== EVENTS ========== */
event RewardAdded(address rewardToken, uint256 reward, uint256 startTimestamp);
event Staked(uint256 indexed tokenId, uint256 amount);
event Withdrawn(uint256 indexed tokenId, uint256 amount);
event RewardPaid(address indexed user,address indexed rewardsToken,uint256 reward);
event Recovered(address token, uint256 amount);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.11;
import "../Bribes.sol";
import "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol";
import '../interfaces/IPermissionsRegistry.sol';
interface IBribe {
function addReward(address) external;
function setVoter(address _Voter) external;
function setMinter(address _Voter) external;
function setOwner(address _Voter) external;
function emergencyRecoverERC20(address tokenAddress, uint256 tokenAmount) external;
function recoverERC20AndUpdateData(address tokenAddress, uint256 tokenAmount) external;
}
contract BribeFactoryV3 is OwnableUpgradeable {
address public last_bribe;
address[] internal _bribes;
address public voter;
address[] public defaultRewardToken;
IPermissionsRegistry public permissionsRegistry;
modifier onlyAllowed() {
require(owner() == msg.sender || permissionsRegistry.hasRole("BRIBE_ADMIN",msg.sender), 'ERR: BRIBE_ADMIN');
_;
}
constructor() {}
function initialize(address _voter, address _permissionsRegistry) initializer public {
__Ownable_init(); //after deploy ownership to multisig
voter = _voter;
// registry to check accesses
permissionsRegistry = IPermissionsRegistry(_permissionsRegistry);
}
/// @notice create a bribe contract
/// @dev _owner must be swpxTeamMultisig
function createBribe(address _owner,address _token0,address _token1, string memory _type) external returns (address) {
require(msg.sender == voter || msg.sender == owner(), 'only voter');
Bribe lastBribe = new Bribe(_owner,voter,address(this), _type);
if(_token0 != address(0)) lastBribe.addReward(_token0);
if(_token1 != address(0)) lastBribe.addReward(_token1);
lastBribe.addRewards(defaultRewardToken);
last_bribe = address(lastBribe);
_bribes.push(last_bribe);
return last_bribe;
}
/* -----------------------------------------------------------------------------
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
ONLY OWNER
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
----------------------------------------------------------------------------- */
/// @notice set the bribe factory voter
function setVoter(address _Voter) external {
require(owner() == msg.sender, 'not owner');
require(_Voter != address(0));
voter = _Voter;
}
/// @notice set the bribe factory permission registry
function setPermissionsRegistry(address _permReg) external {
require(owner() == msg.sender, 'not owner');
require(_permReg != address(0));
permissionsRegistry = IPermissionsRegistry(_permReg);
}
/// @notice set the bribe factory permission registry
function pushDefaultRewardToken(address _token) external {
require(owner() == msg.sender, 'not owner');
require(_token != address(0));
defaultRewardToken.push(_token);
}
/// @notice set the bribe factory permission registry
function removeDefaultRewardToken(address _token) external {
require(owner() == msg.sender, 'not owner');
require(_token != address(0));
uint i = 0;
for(i; i < defaultRewardToken.length; i++){
if(defaultRewardToken[i] == _token){
defaultRewardToken[i] = defaultRewardToken[defaultRewardToken.length -1];
defaultRewardToken.pop();
break;
}
}
}
/* -----------------------------------------------------------------------------
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
ONLY OWNER or BRIBE ADMIN
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
----------------------------------------------------------------------------- */
/// @notice Add a reward token to a given bribe
function addRewardToBribe(address _token, address __bribe) external onlyAllowed {
IBribe(__bribe).addReward(_token);
}
/// @notice Add multiple reward token to a given bribe
function addRewardsToBribe(address[] memory _token, address __bribe) external onlyAllowed {
uint i = 0;
for ( i ; i < _token.length; i++){
IBribe(__bribe).addReward(_token[i]);
}
}
/// @notice Add a reward token to given bribes
function addRewardToBribes(address _token, address[] memory __bribes) external onlyAllowed {
uint i = 0;
for ( i ; i < __bribes.length; i++){
IBribe(__bribes[i]).addReward(_token);
}
}
/// @notice Add multiple reward tokens to given bribes
function addRewardsToBribes(address[][] memory _token, address[] memory __bribes) external onlyAllowed {
uint i = 0;
uint k;
for ( i ; i < __bribes.length; i++){
address _br = __bribes[i];
for(k = 0; k < _token.length; k++){
IBribe(_br).addReward(_token[i][k]);
}
}
}
/// @notice set a new voter in given bribes
function setBribeVoter(address[] memory _bribe, address _voter) external onlyOwner {
uint i = 0;
for(i; i< _bribe.length; i++){
IBribe(_bribe[i]).setVoter(_voter);
}
}
/// @notice set a new minter in given bribes
function setBribeMinter(address[] memory _bribe, address _minter) external onlyOwner {
uint i = 0;
for(i; i< _bribe.length; i++){
IBribe(_bribe[i]).setMinter(_minter);
}
}
/// @notice set a new owner in given bribes
function setBribeOwner(address[] memory _bribe, address _owner) external onlyOwner {
uint i = 0;
for(i; i< _bribe.length; i++){
IBribe(_bribe[i]).setOwner(_owner);
}
}
/// @notice recover an ERC20 from bribe contracts.
function recoverERC20From(address[] memory _bribe, address[] memory _tokens, uint[] memory _amounts) external onlyOwner {
uint i = 0;
require(_bribe.length == _tokens.length, 'mismatch len');
require(_tokens.length == _amounts.length, 'mismatch len');
for(i; i< _bribe.length; i++){
if(_amounts[i] > 0) IBribe(_bribe[i]).emergencyRecoverERC20(_tokens[i], _amounts[i]);
}
}
/// @notice recover an ERC20 from bribe contracts and update.
function recoverERC20AndUpdateData(address[] memory _bribe, address[] memory _tokens, uint[] memory _amounts) external onlyOwner {
uint i = 0;
require(_bribe.length == _tokens.length, 'mismatch len');
require(_tokens.length == _amounts.length, 'mismatch len');
for(i; i< _bribe.length; i++){
if(_amounts[i] > 0) IBribe(_bribe[i]).recoverERC20AndUpdateData(_tokens[i], _amounts[i]);
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.13;
interface IMinter {
function update_period() external returns (uint);
function check() external view returns(bool);
function period() external view returns(uint);
function active_period() external view returns(uint);
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.13;
interface IPermissionsRegistry {
function emergencyCouncil() external view returns(address);
function swpxTeamMultisig() external view returns(address);
function hasRole(bytes memory role, address caller) external view returns(bool);
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.13;
interface IVoter {
function _ve() external view returns (address);
function gauges(address _pair) external view returns (address);
function isGauge(address _gauge) external view returns (bool);
function poolForGauge(address _gauge) external view returns (address);
function factory() external view returns (address);
function minter() external view returns(address);
function isWhitelisted(address token) external view returns (bool);
function notifyRewardAmount(uint amount) external;
function distributeAll() external;
function distributeFees(address[] memory _gauges) external;
function internal_bribes(address _gauge) external view returns (address);
function external_bribes(address _gauge) external view returns (address);
function usedWeights(uint id) external view returns(uint);
function lastVoted(uint id) external view returns(uint);
function poolVote(uint id, uint _index) external view returns(address _pair);
function votes(uint id, address _pool) external view returns(uint votes);
function poolVoteLength(uint tokenId) external view returns(uint);
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.13;
interface IVotingEscrow {
struct Point {
int128 bias;
int128 slope; // # -dweight / dt
uint256 ts;
uint256 blk; // block
}
struct LockedBalance {
int128 amount;
uint start;
uint end;
}
function create_lock_for(uint _value, uint _lock_duration, address _to) external returns (uint);
function locked(uint id) external view returns(LockedBalance memory);
function tokenOfOwnerByIndex(address _owner, uint _tokenIndex) external view returns (uint);
function token() external view returns (address);
function team() external returns (address);
function epoch() external view returns (uint);
function point_history(uint loc) external view returns (Point memory);
function user_point_history(uint tokenId, uint loc) external view returns (Point memory);
function user_point_epoch(uint tokenId) external view returns (uint);
function ownerOf(uint) external view returns (address);
function isApprovedOrOwner(address, uint) external view returns (bool);
function transferFrom(address, address, uint) external;
function voted(uint) external view returns (bool);
function attachments(uint) external view returns (uint);
function voting(uint tokenId) external;
function abstain(uint tokenId) external;
function attach(uint tokenId) external;
function detach(uint tokenId) external;
function checkpoint() external;
function deposit_for(uint tokenId, uint value) external;
function balanceOfAtNFT(uint _tokenId, uint _block) external view returns (uint);
function balanceOfNFT(uint _id) external view returns (uint);
function balanceOf(address _owner) external view returns (uint);
function totalSupply() external view returns (uint);
function supply() external view returns (uint);
function decimals() external view returns(uint8);
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.13;
library Constants {
uint256 internal constant EPOCH_LENGTH = 30 minutes; //7 days;
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.13;
library Math {
function max(uint a, uint b) internal pure returns (uint) {
return a >= b ? a : b;
}
function min(uint a, uint b) internal pure returns (uint) {
return a < b ? a : b;
}
function sqrt(uint y) internal pure returns (uint z) {
if (y > 3) {
z = y;
uint x = y / 2 + 1;
while (x < z) {
z = x;
x = (y / x + x) / 2;
}
} else if (y != 0) {
z = 1;
}
}
function cbrt(uint256 n) internal pure returns (uint256) { unchecked {
uint256 x = 0;
for (uint256 y = 1 << 255; y > 0; y >>= 3) {
x <<= 1;
uint256 z = 3 * x * (x + 1) + 1;
if (n / y >= z) {
n -= y * z;
x += 1;
}
}
return x;
}}
}