Contract Name:
PairFactory
Contract Source Code:
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.26;
import {IPairFactory} from "../interfaces/IPairFactory.sol";
import {IPair} from "./../interfaces/IPair.sol";
import {Pair} from "./../Pair.sol";
contract PairFactory is IPairFactory {
/// @inheritdoc IPairFactory
address public immutable voter;
/// @inheritdoc IPairFactory
address public treasury;
address public accessHub;
address public immutable feeRecipientFactory;
uint256 public fee;
/// @dev max swap fee set to 10%
uint256 public constant MAX_FEE = 100_000;
uint256 public feeSplit;
mapping(address token0 => mapping(address token1 => mapping(bool stable => address pair)))
public getPair;
address[] public allPairs;
/// @dev simplified check if its a pair, given that `stable` flag might not be available in peripherals
mapping(address pair => bool isPair) public isPair;
/// @dev pair => fee
mapping(address pair => uint256 fee) public _pairFee;
/// @dev whether the pair has skim enabled or not
mapping(address pair => bool skimEnabled) public skimEnabled;
/// @dev if enabled, fee split to treasury if no gauge
bool public feeSplitWhenNoGauge;
/// @inheritdoc IPairFactory
bytes32 public immutable pairCodeHash;
constructor(
address _voter,
address _treasury,
address _accessHub,
address _feeRecipientFactory
) {
/// @dev default of 0.30%
fee = 3000;
voter = _voter;
treasury = _treasury;
accessHub = _accessHub;
feeRecipientFactory = _feeRecipientFactory;
pairCodeHash = keccak256(type(Pair).creationCode);
}
modifier onlyGovernanceOrVoter() {
require(msg.sender == accessHub || msg.sender == voter);
_;
}
modifier onlyGovernance() {
require(msg.sender == accessHub, NOT_AUTHORIZED());
_;
}
/// @inheritdoc IPairFactory
function allPairsLength() external view returns (uint256) {
return allPairs.length;
}
/// @inheritdoc IPairFactory
/** @dev for GLOBAL */
function setFee(uint256 _fee) external onlyGovernanceOrVoter {
/// @dev ensure it's not zero
require(_fee != 0, ZERO_FEE());
/// @dev ensure less than or equal to MAX_FEE
require(_fee <= MAX_FEE, FEE_TOO_HIGH());
/// @dev set the global fee
fee = _fee;
emit SetFee(_fee);
}
/// @inheritdoc IPairFactory
/** @dev for INDIVIDUAL PAIRS */
function setPairFee(
address _pair,
uint256 _fee
) external onlyGovernanceOrVoter {
/// @dev ensure less than or equal to MAX_FEE
require(_fee <= MAX_FEE, FEE_TOO_HIGH());
/// @dev if _fee is set to 0, fallback to default fee for the pair
uint256 __fee = (_fee == 0 ? fee : _fee);
/// @dev set to the new fee
IPair(_pair).setFee(__fee);
/// @dev store the fee
_pairFee[_pair] = __fee;
emit SetPairFee(_pair, _fee);
}
/// @inheritdoc IPairFactory
function pairFee(address _pair) public view returns (uint256 feeForPair) {
return _pairFee[_pair];
}
/// @inheritdoc IPairFactory
function setTreasury(address _treasury) external onlyGovernance {
treasury = _treasury;
emit NewTreasury(msg.sender, _treasury);
}
/// @inheritdoc IPairFactory
/// @notice allow feeSplit directly to treasury if (gauge) does not exist
function setFeeSplitWhenNoGauge(bool status) external onlyGovernance {
feeSplitWhenNoGauge = status;
emit FeeSplitWhenNoGauge(msg.sender, status);
}
/// @inheritdoc IPairFactory
/// @notice set the percent of fee growth to mint in BP e.g. (9500 to mint 95% of fees)
/// @dev gated to voter or AccessHub
function setFeeSplit(uint256 _feeSplit) external onlyGovernanceOrVoter {
/// @dev ensure feeSplit is within bounds
require(_feeSplit <= 10_000, INVALID_FEE_SPLIT());
/// @dev update the global feeSplit for newly created pairs
feeSplit = _feeSplit;
emit SetFeeSplit(_feeSplit);
}
/// @inheritdoc IPairFactory
function setPairFeeSplit(
address _pair,
uint256 _feeSplit
) external onlyGovernanceOrVoter {
/// @dev ensure feeSplit is within bounds
require(_feeSplit <= 10_000, INVALID_FEE_SPLIT());
/// @dev set the feeSplit for the specific pair
IPair(_pair).setFeeSplit(_feeSplit);
emit SetPairFeeSplit(_pair, _feeSplit);
}
/// @inheritdoc IPairFactory
function createPair(
address tokenA,
address tokenB,
bool stable
) external returns (address pair) {
/// @dev ensure that tokenA and tokenB are not the same
require(tokenA != tokenB, IA());
/// @dev calculate token0 and token1 of the pair by sorting the addresses
(address token0, address token1) = tokenA < tokenB
? (tokenA, tokenB)
: (tokenB, tokenA);
/// @dev require token is not the 0 address
/// @dev we only check token0 because address(0) would be sorted first
require(token0 != address(0), ZA());
/// @dev ensure the pairing does not already exist
require(getPair[token0][token1][stable] == address(0), PE());
/// @dev pair creation logic
bytes32 salt = keccak256(abi.encodePacked(token0, token1, stable));
pair = address(new Pair{salt: salt}());
/// @dev initialize the pair upon creation
IPair(pair).initialize(token0, token1, stable);
/// @dev should almost always always default to the global fee
IPair(pair).setFee(pairFee(pair));
/// @dev if we want an active fee split for gaugeless pairs
if (feeSplitWhenNoGauge) {
/// @dev set the fee recipient as the treasury
IPair(pair).setFeeRecipient(treasury);
/// @dev set the global fee split to the pair
IPair(pair).setFeeSplit(feeSplit);
}
/// @dev populate mapping
getPair[token0][token1][stable] = pair;
/// @dev populate mapping in the reverse direction
getPair[token1][token0][stable] = pair;
/// @dev push to the allPairs set
allPairs.push(pair);
/// @dev set the pair status as true
isPair[pair] = true;
emit PairCreated(token0, token1, pair, allPairs.length);
}
/// @inheritdoc IPairFactory
/// @dev gated to voter or AccessHub
function setFeeRecipient(address _pair, address _feeRecipient) external {
/// @dev only voter can call upon creation
require(msg.sender == voter, NOT_AUTHORIZED());
/// @dev set the fee receiving contract for a pair
IPair(_pair).setFeeRecipient(_feeRecipient);
emit SetFeeRecipient(_pair, _feeRecipient);
}
/// @inheritdoc IPairFactory
/// @dev function restrict or enable skim functionality on legacy pairs
function setSkimEnabled(
address _pair,
bool _status
) external onlyGovernance {
skimEnabled[_pair] = skimEnabled[_pair] != _status
? _status
: skimEnabled[_pair];
emit SkimStatus(_pair, _status);
}
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity ^0.8.26;
interface IPairFactory {
error FEE_TOO_HIGH();
error ZERO_FEE();
/// @dev invalid assortment
error IA();
/// @dev zero address
error ZA();
/// @dev pair exists
error PE();
error NOT_AUTHORIZED();
error INVALID_FEE_SPLIT();
event PairCreated(
address indexed token0,
address indexed token1,
address pair,
uint256
);
event SetFee(uint256 indexed fee);
event SetPairFee(address indexed pair, uint256 indexed fee);
event SetFeeSplit(uint256 indexed _feeSplit);
event SetPairFeeSplit(address indexed pair, uint256 indexed _feeSplit);
event SkimStatus(address indexed _pair, bool indexed _status);
event NewTreasury(address indexed _caller, address indexed _newTreasury);
event FeeSplitWhenNoGauge(address indexed _caller, bool indexed _status);
event SetFeeRecipient(address indexed pair, address indexed feeRecipient);
/// @notice returns the total length of legacy pairs
/// @return _length the length
function allPairsLength() external view returns (uint256 _length);
/// @notice calculates if the address is a legacy pair
/// @param pair the address to check
/// @return _boolean the bool return
function isPair(address pair) external view returns (bool _boolean);
/// @notice calculates the pairCodeHash
/// @return _hash the pair code hash
function pairCodeHash() external view returns (bytes32 _hash);
/// @param tokenA address of tokenA
/// @param tokenB address of tokenB
/// @param stable whether it uses the stable curve
/// @return _pair the address of the pair
function getPair(
address tokenA,
address tokenB,
bool stable
) external view returns (address _pair);
/// @notice creates a new legacy pair
/// @param tokenA address of tokenA
/// @param tokenB address of tokenB
/// @param stable whether it uses the stable curve
/// @return pair the address of the created pair
function createPair(
address tokenA,
address tokenB,
bool stable
) external returns (address pair);
/// @notice the address of the voter
/// @return _voter the address of the voter
function voter() external view returns (address _voter);
/// @notice returns the address of a pair based on the index
/// @param _index the index to check for a pair
/// @return _pair the address of the pair at the index
function allPairs(uint256 _index) external view returns (address _pair);
/// @notice the swap fee of a pair
/// @param _pair the address of the pair
/// @return _fee the fee
function pairFee(address _pair) external view returns (uint256 _fee);
/// @notice the split of fees
/// @return _split the feeSplit
function feeSplit() external view returns (uint256 _split);
/// @notice sets the swap fee for a pair
/// @param _pair the address of the pair
/// @param _fee the fee for the pair
function setPairFee(address _pair, uint256 _fee) external;
/// @notice set the swap fees of the pair
/// @param _fee the fee, scaled to MAX 10% of 100_000
function setFee(uint256 _fee) external;
/// @notice the address for the treasury
/// @return _treasury address of the treasury
function treasury() external view returns (address _treasury);
/// @notice sets the pairFees contract
/// @param _pair the address of the pair
/// @param _pairFees the address of the new Pair Fees
function setFeeRecipient(address _pair, address _pairFees) external;
/// @notice sets the feeSplit for a pair
/// @param _pair the address of the pair
/// @param _feeSplit the feeSplit
function setPairFeeSplit(address _pair, uint256 _feeSplit) external;
/// @notice whether there is feeSplit when there's no gauge
/// @return _boolean whether there is a feesplit when no gauge
function feeSplitWhenNoGauge() external view returns (bool _boolean);
/// @notice whether a pair can be skimmed
/// @param _pair the pair address
/// @return _boolean whether skim is enabled
function skimEnabled(address _pair) external view returns (bool _boolean);
/// @notice set whether skim is enabled for a specific pair
function setSkimEnabled(address _pair, bool _status) external;
/// @notice sets a new treasury address
/// @param _treasury the new treasury address
function setTreasury(address _treasury) external;
/// @notice set whether there should be a feesplit without gauges
/// @param status whether enabled or not
function setFeeSplitWhenNoGauge(bool status) external;
/// @notice sets the feesSplit globally
/// @param _feeSplit the fee split
function setFeeSplit(uint256 _feeSplit) external;
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity ^0.8.26;
interface IPair {
error NOT_AUTHORIZED();
error UNSTABLE_RATIO();
/// @dev safe transfer failed
error STF();
error OVERFLOW();
/// @dev skim disabled
error SD();
/// @dev insufficient liquidity minted
error ILM();
/// @dev insufficient liquidity burned
error ILB();
/// @dev insufficient output amount
error IOA();
/// @dev insufficient input amount
error IIA();
error IL();
error IT();
error K();
event Mint(address indexed sender, uint256 amount0, uint256 amount1);
event Burn(
address indexed sender,
uint256 amount0,
uint256 amount1,
address indexed to
);
event Swap(
address indexed sender,
uint256 amount0In,
uint256 amount1In,
uint256 amount0Out,
uint256 amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
/// @notice initialize the pool, called only once programatically
function initialize(
address _token0,
address _token1,
bool _stable
) external;
/// @notice calculate the current reserves of the pool and their last 'seen' timestamp
/// @return _reserve0 amount of token0 in reserves
/// @return _reserve1 amount of token1 in reserves
/// @return _blockTimestampLast the timestamp when the pool was last updated
function getReserves()
external
view
returns (
uint112 _reserve0,
uint112 _reserve1,
uint32 _blockTimestampLast
);
/// @notice mint the pair tokens (LPs)
/// @param to where to mint the LP tokens to
/// @return liquidity amount of LP tokens to mint
function mint(address to) external returns (uint256 liquidity);
/// @notice burn the pair tokens (LPs)
/// @param to where to send the underlying
/// @return amount0 amount of amount0
/// @return amount1 amount of amount1
function burn(
address to
) external returns (uint256 amount0, uint256 amount1);
/// @notice direct swap through the pool
function swap(
uint256 amount0Out,
uint256 amount1Out,
address to,
bytes calldata data
) external;
/// @notice force balances to match reserves, can be used to harvest rebases from rebasing tokens or other external factors
/// @param to where to send the excess tokens to
function skim(address to) external;
/// @notice force reserves to match balances, prevents skim excess if skim is enabled
function sync() external;
/// @notice set the pair fees contract address
function setFeeRecipient(address _pairFees) external;
/// @notice set the feesplit variable
function setFeeSplit(uint256 _feeSplit) external;
/// @notice sets the swap fee of the pair
/// @dev max of 10_000 (10%)
/// @param _fee the fee
function setFee(uint256 _fee) external;
/// @notice 'mint' the fees as LP tokens
/// @dev this is used for protocol/voter fees
function mintFee() external;
/// @notice calculates the amount of tokens to receive post swap
/// @param amountIn the token amount
/// @param tokenIn the address of the token
function getAmountOut(
uint256 amountIn,
address tokenIn
) external view returns (uint256 amountOut);
/// @notice returns various metadata about the pair
function metadata()
external
view
returns (
uint256 _decimals0,
uint256 _decimals1,
uint256 _reserve0,
uint256 _reserve1,
bool _stable,
address _token0,
address _token1
);
/// @notice returns the feeSplit of the pair
function feeSplit() external view returns (uint256);
/// @notice returns the fee of the pair
function fee() external view returns (uint256);
/// @notice returns the feeRecipient of the pair
function feeRecipient() external view returns (address);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.26;
import {ERC20} from "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import {ReentrancyGuard} from "@openzeppelin/contracts/utils/ReentrancyGuard.sol";
import {Math} from "@openzeppelin/contracts/utils/math/Math.sol";
import {IERC20Extended} from "./interfaces/IERC20Extended.sol";
import {UQ112x112} from "./libraries/UQ112x112.sol";
import {IPairCallee} from "./interfaces/IPairCallee.sol";
import {IPairFactory} from "./interfaces/IPairFactory.sol";
import {IPair} from "./interfaces/IPair.sol";
contract Pair is IPair, ERC20, ReentrancyGuard {
using UQ112x112 for uint224;
/// @dev Structure to capture time period obervations every 30 minutes, used for local oracles
struct Observation {
uint256 timestamp;
uint256 reserve0Cumulative;
uint256 reserve1Cumulative;
}
Observation[] public observations;
uint256 internal _unlocked;
/// @notice Capture oracle reading every 30 minutes
uint256 constant periodSize = 1800;
/// @notice min liquidity amount which is burned on creation
uint256 public constant MINIMUM_LIQUIDITY = 10 ** 3;
/// @notice legacy factory address
address public immutable factory;
/// @notice token0 in the pool
address public token0;
/// @notice token1 in the pool
address public token1;
/// @notice where the swap fees accrue to
address public feeRecipient;
/// @dev uses single storage slot, accessible via getReserves
uint112 private reserve0;
/// @dev uses single storage slot, accessible via getReserves
uint112 private reserve1;
/// @dev uses single storage slot, accessible via getReserves
uint32 private blockTimestampLast;
uint256 public reserve0CumulativeLast;
uint256 public reserve1CumulativeLast;
/// @dev reserve0 * reserve1, as of immediately after the most recent liquidity event
uint256 public kLast;
/// @dev the portion that goes to feeRecipient, rest goes to LPs. 100% of the fees goes to feeRecipient if it's set to 10000
uint256 public feeSplit;
uint256 public fee;
uint256 internal decimals0;
uint256 internal decimals1;
/// @dev first MINIMUM_LIQUIDITY tokens are permanently locked
uint256 internal constant MINIMUM_K = 10 ** 9;
/// @dev 1m = 100%
uint256 internal constant FEE_DENOM = 1_000_000;
/// @notice whether the pool uses the xy(x^2 * y + y^2 * x) >= k swap curve
bool public stable;
string internal _name;
string internal _symbol;
constructor() ERC20("", "") {
/// @dev initialize the factory address
factory = msg.sender;
}
/// @inheritdoc IPair
function initialize(
address _token0,
address _token1,
bool _stable
) external {
/// @dev prevent anyone other than the factory from calling
require(msg.sender == factory, NOT_AUTHORIZED());
token0 = _token0;
token1 = _token1;
string memory __name;
string memory __symbol;
stable = _stable;
if (_stable) {
__name = string(
string.concat(
"Legacy Correlated- ",
IERC20Extended(token0).symbol(),
"/",
IERC20Extended(token1).symbol()
)
);
__symbol = string(
string.concat(
"cAMM-",
IERC20Extended(token0).symbol(),
"/",
IERC20Extended(token1).symbol()
)
);
} else {
__name = string(
string.concat(
"Legacy Volatile- ",
IERC20Extended(token0).symbol(),
"/",
IERC20Extended(token1).symbol()
)
);
__symbol = string(
string.concat(
"vAMM-",
IERC20Extended(token0).symbol(),
"/",
IERC20Extended(token1).symbol()
)
);
}
_name = __name;
_symbol = __symbol;
observations.push(Observation(block.timestamp, 0, 0));
decimals0 = 10 ** IERC20Extended(token0).decimals();
decimals1 = 10 ** IERC20Extended(token1).decimals();
}
/// @inheritdoc IPair
function getReserves()
public
view
returns (
uint112 _reserve0,
uint112 _reserve1,
uint32 _blockTimestampLast
)
{
_reserve0 = reserve0;
_reserve1 = reserve1;
_blockTimestampLast = blockTimestampLast;
}
function _safeTransfer(address token, address to, uint256 value) private {
(bool success, bytes memory data) = token.call(
abi.encodeCall(IERC20Extended.transfer, (to, value))
);
if (!(success && (data.length == 0 || abi.decode(data, (bool))))) {
revert STF();
}
}
/// @dev update reserves and, on the first call per block, reserve accumulators
function _update(
uint256 balance0,
uint256 balance1,
uint112 _reserve0,
uint112 _reserve1
) private {
/// @dev ensure no overflow
require(
balance0 <= type(uint112).max && balance1 <= type(uint112).max,
OVERFLOW()
);
/// @dev store blockstamp
uint256 blockTimestamp = block.timestamp;
/// @dev declare
uint256 timeElapsed;
/// @dev overflow is desired
unchecked {
/// @dev time elapsed since the last update
timeElapsed = blockTimestamp - uint256(blockTimestampLast);
/// @dev if timeElapsed is gt 0 and the reserves are not 0
if (timeElapsed > 0 && _reserve0 != 0 && _reserve1 != 0) {
/// @dev update the cumulatives
reserve0CumulativeLast += _reserve0 * timeElapsed;
reserve1CumulativeLast += _reserve1 * timeElapsed;
}
}
/// @dev fetch the last observation
Observation memory _point = lastObservation();
/// @dev compare the last observation with current timestamp, if greater than 30 minutes, record a new event
timeElapsed = blockTimestamp - _point.timestamp;
/// @dev if > the periodSize (usually 30m twar)
if (timeElapsed > periodSize) {
observations.push(
Observation(
blockTimestamp,
reserve0CumulativeLast,
reserve1CumulativeLast
)
);
}
reserve0 = uint112(balance0);
reserve1 = uint112(balance1);
blockTimestampLast = uint32(blockTimestamp);
emit Sync(reserve0, reserve1);
}
/// @dev if fee is on, mint liquidity up to the entire growth in sqrt(k)
function _mintFee(
uint112 _reserve0,
uint112 _reserve1
) private returns (bool feeOn) {
/// @dev gas savings
address _feeRecipient = feeRecipient;
/// @dev gas savings
uint256 _kLast = kLast;
/// @dev we define fee being on as the existence of the fee recipient
feeOn = _feeRecipient != address(0);
/// @dev if there are any fees not going to LP providers
if (feeOn) {
/// @dev portion of fees that go to feeRecipient
uint256 _feeSplit = feeSplit;
/// @dev if the reserve calculation is not 0
if (_kLast != 0) {
/// @dev if a stableswap/correlated pair with curve: xy(x^2y + y^2x) >= k
if (stable) {
/// @dev fetch current k value
uint256 k = _k(_reserve0, _reserve1);
/// @dev if k is greater than the _kLast variable
if (k > _kLast) {
uint256 fourthRoot_e18 = Math.sqrt(
Math.mulDiv(Math.sqrt(_kLast), 1e36, Math.sqrt(k))
);
uint256 numerator = _feeSplit *
(1e18 - fourthRoot_e18) *
1e18;
uint256 denominator = ((10_000 * 1e18) -
(_feeSplit * (1e18 - fourthRoot_e18)));
/// @dev new liquidity to be minted
uint256 feeAsLiquidity = (totalSupply() * numerator) /
denominator /
1e18;
if (feeAsLiquidity > 0) {
_mint(_feeRecipient, feeAsLiquidity);
}
}
}
/// @dev if !stable
else {
uint256 rootK = Math.sqrt(
_k(uint256(_reserve0), uint256(_reserve1))
);
uint256 rootKLast = Math.sqrt(_kLast);
if (rootK > rootKLast) {
/// @dev calculate fee amounts to send
uint256 diffK = rootK - rootKLast;
uint256 dueToProtocol = (diffK * _feeSplit) / 10_000;
uint256 dueToLp = rootKLast + diffK - dueToProtocol;
/// @dev new liquidity to be minted
/// @dev n = s*P/d
uint256 feeAsLiquidity = (totalSupply() *
dueToProtocol) / dueToLp;
if (feeAsLiquidity > 0) {
_mint(_feeRecipient, feeAsLiquidity);
}
}
}
}
}
/// @dev if !feeOn
else if (_kLast != 0) {
/// @dev update kLast to reflect reserves
kLast = _k(reserve0, reserve1);
}
}
/// @inheritdoc IPair
/// @dev this low-level function should be called from a contract which performs important safety checks
function mint(
address to
) external nonReentrant returns (uint256 liquidity) {
/// @dev gas savings
(uint112 _reserve0, uint112 _reserve1, ) = getReserves();
uint256 balance0 = IERC20Extended(token0).balanceOf(address(this));
uint256 balance1 = IERC20Extended(token1).balanceOf(address(this));
uint256 amount0 = balance0 - _reserve0;
uint256 amount1 = balance1 - _reserve1;
bool feeOn = _mintFee(_reserve0, _reserve1);
/// @dev gas savings, must be defined here since totalSupply can update in _mintFee
uint256 _totalSupply = totalSupply();
if (_totalSupply == 0) {
liquidity = Math.sqrt(amount0 * amount1) - MINIMUM_LIQUIDITY;
/// @dev permanently lock the first MINIMUM_LIQUIDITY tokens
_mint(address(0xdead), MINIMUM_LIQUIDITY);
if (stable) {
require(_k(amount0, amount1) >= MINIMUM_K, K());
require(
((amount0 * 1e18) / decimals0 ==
(amount1 * 1e18) / decimals1),
UNSTABLE_RATIO()
);
}
} else {
liquidity = Math.min(
(amount0 * _totalSupply) / _reserve0,
(amount1 * _totalSupply) / _reserve1
);
}
require(liquidity != 0, ILM());
_mint(to, liquidity);
_update(balance0, balance1, _reserve0, _reserve1);
/// @dev reserve0 and reserve1 are up-to-date
if (feeOn) kLast = _k(uint256(reserve0), uint256(reserve1));
emit Mint(msg.sender, amount0, amount1);
}
/// @inheritdoc IPair
/// @dev this low-level function should be called from a contract which performs important safety checks
function burn(
address to
) external nonReentrant returns (uint256 amount0, uint256 amount1) {
/// @dev gas savings
(uint112 _reserve0, uint112 _reserve1, ) = getReserves();
/// @dev gas savings
address _token0 = token0;
/// @dev gas savings
address _token1 = token1;
uint256 balance0 = IERC20Extended(_token0).balanceOf(address(this));
uint256 balance1 = IERC20Extended(_token1).balanceOf(address(this));
/// @dev fetch the balance of the liquidity of the Pair
uint256 liquidity = balanceOf(address(this));
/// @dev attempt to mint fees and calculate if feeOn is active
bool feeOn = _mintFee(_reserve0, _reserve1);
/// @dev gas savings, must be defined here since totalSupply can update in _mintFee
uint256 _totalSupply = totalSupply();
/// @dev using balances ensures pro-rata distribution
amount0 = (liquidity * balance0) / _totalSupply;
/// @dev using balances ensures pro-rata distribution
amount1 = (liquidity * balance1) / _totalSupply;
/// @dev require the amounts are not zero, else it's insufficient liquidity burned and revert
require(amount0 != 0 && amount1 != 0, ILB());
/// @dev burn the liquidity tokens
_burn(address(this), liquidity);
/// @dev safe transfer the two underlying tokens (incase of tax tokens etc)
_safeTransfer(_token0, to, amount0);
_safeTransfer(_token1, to, amount1);
/// @dev fetch updated balances
balance0 = IERC20Extended(_token0).balanceOf(address(this));
balance1 = IERC20Extended(_token1).balanceOf(address(this));
/// @dev update with the new balances
_update(balance0, balance1, _reserve0, _reserve1);
/// @dev reserve0 and reserve1 are up-to-date
if (feeOn) kLast = _k(reserve0, reserve1);
emit Burn(msg.sender, amount0, amount1, to);
}
/// @inheritdoc IPair
/// @dev this low-level function should be called from a contract which performs important safety checks
function swap(
uint256 amount0Out,
uint256 amount1Out,
address to,
bytes calldata data
) external nonReentrant {
/// @dev require at least one is not 0, else revert for Insufficient Output Amount
require(amount0Out != 0 || amount1Out != 0, IOA());
/// @dev gas savings
(uint112 _reserve0, uint112 _reserve1, ) = getReserves();
/// @dev ensure there is enough liquidity for the swap
require(amount0Out <= _reserve0 && amount1Out <= _reserve1, IL());
/// @dev gas savings
address _token0 = token0;
address _token1 = token1;
require(to != _token0 && to != _token1, IT());
/// @dev optimistically transfer tokens
if (amount0Out > 0) _safeTransfer(_token0, to, amount0Out);
/// @dev optimistically transfer tokens
if (amount1Out > 0) _safeTransfer(_token1, to, amount1Out);
if (data.length > 0)
IPairCallee(to).hook(msg.sender, amount0Out, amount1Out, data);
uint256 balance0 = IERC20Extended(_token0).balanceOf(address(this));
uint256 balance1 = IERC20Extended(_token1).balanceOf(address(this));
uint256 amount0In;
uint256 amount1In;
unchecked {
amount0In = balance0 > _reserve0 - amount0Out
? balance0 - (_reserve0 - amount0Out)
: 0;
amount1In = balance1 > _reserve1 - amount1Out
? balance1 - (_reserve1 - amount1Out)
: 0;
}
require(amount0In != 0 || amount1In != 0, IIA());
/// @dev FEE_DENOM as the denominator invariant for calculating swap fees
uint256 balance0Adjusted = balance0 - ((amount0In * fee) / FEE_DENOM);
uint256 balance1Adjusted = balance1 - ((amount1In * fee) / FEE_DENOM);
require(
_k(balance0Adjusted, balance1Adjusted) >=
_k(uint256(_reserve0), uint256(_reserve1)),
K()
);
_update(balance0, balance1, _reserve0, _reserve1);
emit Swap(msg.sender, amount0In, amount1In, amount0Out, amount1Out, to);
}
/// @inheritdoc IPair
function skim(address to) external nonReentrant {
/// @dev if skim disabled, revert
/// @dev by default it is disabled as it uses a mapping in the pair factory contract
require((IPairFactory(factory).skimEnabled(address(this))), SD());
/// @dev gas savings
address _token0 = token0;
/// @dev gas savings
address _token1 = token1;
_safeTransfer(
_token0,
to,
IERC20Extended(_token0).balanceOf(address(this)) - reserve0
);
_safeTransfer(
_token1,
to,
IERC20Extended(_token1).balanceOf(address(this)) - reserve1
);
}
/// @inheritdoc IPair
function sync() external nonReentrant {
/// @dev update the reserves to match balances
_update(
IERC20Extended(token0).balanceOf(address(this)),
IERC20Extended(token1).balanceOf(address(this)),
reserve0,
reserve1
);
}
/// @inheritdoc IPair
function setFeeRecipient(address _feeRecipient) external {
/// @dev gate to the PairFactory
require(msg.sender == factory, NOT_AUTHORIZED());
feeRecipient = _feeRecipient;
}
/// @inheritdoc IPair
function setFeeSplit(uint256 _feeSplit) external {
/// @dev gate to the PairFactory
require(msg.sender == factory, NOT_AUTHORIZED());
feeSplit = _feeSplit;
}
/// @inheritdoc IPair
function setFee(uint256 _fee) external {
/// @dev gate to the PairFactory
require(msg.sender == factory, NOT_AUTHORIZED());
fee = _fee;
}
/// @inheritdoc IPair
function mintFee() external nonReentrant {
/// @dev fetch the current public reserves
uint112 _reserve0 = reserve0;
uint112 _reserve1 = reserve1;
/// @dev mint the accumulated fees
bool feeOn = _mintFee(_reserve0, _reserve1);
/// @dev if minting was successful
if (feeOn) kLast = _k(uint256(_reserve0), uint256(_reserve1));
}
function _k(uint256 x, uint256 y) internal view returns (uint256) {
if (stable) {
uint256 _x = (x * 10 ** 18) / decimals0;
uint256 _y = (y * 10 ** 18) / decimals1;
uint256 _a = (_x * _y) / 10 ** 18;
uint256 _b = ((_x * _x) / 10 ** 18 + (_y * _y) / 10 ** 18);
/// @dev x3y+y3x >= k
return (_a * _b) / 10 ** 18;
} else {
/// @dev xy >= k
return x * y;
}
}
function _f(uint256 x0, uint256 y) internal pure returns (uint256) {
return
(x0 * ((((y * y) / 1e18) * y) / 1e18)) /
1e18 +
(((((x0 * x0) / 1e18) * x0) / 1e18) * y) /
1e18;
}
function _d(uint256 x0, uint256 y) internal pure returns (uint256) {
return
(3 * x0 * ((y * y) / 1e18)) /
1e18 +
((((x0 * x0) / 1e18) * x0) / 1e18);
}
function _get_y(
uint256 x0,
uint256 xy,
uint256 y
) internal pure returns (uint256) {
for (uint256 i = 0; i < 255; ++i) {
uint256 y_prev = y;
uint256 k = _f(x0, y);
if (k < xy) {
uint256 dy = ((xy - k) * 1e18) / _d(x0, y);
y = y + dy;
} else {
uint256 dy = ((k - xy) * 1e18) / _d(x0, y);
y = y - dy;
}
if (y > y_prev) {
if (y - y_prev <= 1) {
return y;
}
} else {
if (y_prev - y <= 1) {
return y;
}
}
}
return y;
}
/// @inheritdoc IPair
function getAmountOut(
uint256 amountIn,
address tokenIn
) external view returns (uint256) {
(uint256 _reserve0, uint256 _reserve1) = (reserve0, reserve1);
/// @dev remove fee from amount received
amountIn -= (amountIn * fee) / FEE_DENOM;
return _getAmountOut(amountIn, tokenIn, _reserve0, _reserve1) - 1;
}
function _getAmountOut(
uint256 amountIn,
address tokenIn,
uint256 _reserve0,
uint256 _reserve1
) internal view returns (uint256) {
if (stable) {
uint256 xy = _k(_reserve0, _reserve1);
_reserve0 = (_reserve0 * 1e18) / decimals0;
_reserve1 = (_reserve1 * 1e18) / decimals1;
(uint256 reserveA, uint256 reserveB) = tokenIn == token0
? (_reserve0, _reserve1)
: (_reserve1, _reserve0);
amountIn = tokenIn == token0
? (amountIn * 1e18) / decimals0
: (amountIn * 1e18) / decimals1;
uint256 y = reserveB - _get_y(amountIn + reserveA, xy, reserveB);
return (y * (tokenIn == token0 ? decimals1 : decimals0)) / 1e18;
} else {
(uint256 reserveA, uint256 reserveB) = tokenIn == token0
? (_reserve0, _reserve1)
: (_reserve1, _reserve0);
return (amountIn * reserveB) / (reserveA + amountIn);
}
}
function metadata()
external
view
returns (
uint256 _decimals0,
uint256 _decimals1,
uint256 _reserve0,
uint256 _reserve1,
bool _stable,
address _token0,
address _token1
)
{
return (
decimals0,
decimals1,
reserve0,
reserve1,
stable,
token0,
token1
);
}
function observationLength() external view returns (uint256) {
return observations.length;
}
function lastObservation() public view returns (Observation memory) {
return observations[observations.length - 1];
}
/// @dev produces the cumulative price using counterfactuals to save gas and avoid a call to sync.
function currentCumulativePrices()
public
view
returns (
uint256 reserve0Cumulative,
uint256 reserve1Cumulative,
uint256 blockTimestamp
)
{
blockTimestamp = block.timestamp;
reserve0Cumulative = reserve0CumulativeLast;
reserve1Cumulative = reserve1CumulativeLast;
/// @dev if time has elapsed since the last update on the pair, mock the accumulated price values
(
uint112 _reserve0,
uint112 _reserve1,
uint32 _blockTimestampLast
) = getReserves();
if (_blockTimestampLast != uint32(blockTimestamp)) {
/// @dev subtraction overflow is desired
uint256 timeElapsed = blockTimestamp - uint256(_blockTimestampLast);
reserve0Cumulative += _reserve0 * timeElapsed;
reserve1Cumulative += _reserve1 * timeElapsed;
}
}
/// @dev gives the current twap price measured from amountIn * tokenIn gives amountOut
function current(
address tokenIn,
uint256 amountIn
) external view returns (uint256 amountOut) {
Observation memory _observation = lastObservation();
(
uint256 reserve0Cumulative,
uint256 reserve1Cumulative,
) = currentCumulativePrices();
if (block.timestamp == _observation.timestamp) {
_observation = observations[observations.length - 2];
}
uint256 timeElapsed = block.timestamp - _observation.timestamp;
uint256 _reserve0 = (reserve0Cumulative -
_observation.reserve0Cumulative) / timeElapsed;
uint256 _reserve1 = (reserve1Cumulative -
_observation.reserve1Cumulative) / timeElapsed;
amountOut = _getAmountOut(amountIn, tokenIn, _reserve0, _reserve1);
}
/// @dev as per `current`, however allows user configured granularity, up to the full window size
function quote(
address tokenIn,
uint256 amountIn,
uint256 granularity
) external view returns (uint256 amountOut) {
uint256[] memory _prices = sample(tokenIn, amountIn, granularity, 1);
uint256 priceAverageCumulative;
for (uint256 i = 0; i < _prices.length; ++i) {
priceAverageCumulative += _prices[i];
}
return priceAverageCumulative / granularity;
}
/// @dev returns a memory set of twap prices
function prices(
address tokenIn,
uint256 amountIn,
uint256 points
) external view returns (uint256[] memory) {
return sample(tokenIn, amountIn, points, 1);
}
function sample(
address tokenIn,
uint256 amountIn,
uint256 points,
uint256 window
) public view returns (uint256[] memory) {
uint256[] memory _prices = new uint256[](points);
uint256 length = observations.length - 1;
uint256 i = length - (points * window);
uint256 nextIndex = 0;
uint256 index = 0;
for (; i < length; i += window) {
nextIndex = i + window;
uint256 timeElapsed = observations[nextIndex].timestamp -
observations[i].timestamp;
uint256 _reserve0 = (observations[nextIndex].reserve0Cumulative -
observations[i].reserve0Cumulative) / timeElapsed;
uint256 _reserve1 = (observations[nextIndex].reserve1Cumulative -
observations[i].reserve1Cumulative) / timeElapsed;
_prices[index] = _getAmountOut(
amountIn,
tokenIn,
_reserve0,
_reserve1
);
/// @dev index < length; length cannot overflow
unchecked {
index = index + 1;
}
}
return _prices;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (token/ERC20/ERC20.sol)
pragma solidity ^0.8.20;
import {IERC20} from "./IERC20.sol";
import {IERC20Metadata} from "./extensions/IERC20Metadata.sol";
import {Context} from "../../utils/Context.sol";
import {IERC20Errors} from "../../interfaces/draft-IERC6093.sol";
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
*
* TIP: For a detailed writeup see our guide
* https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* The default value of {decimals} is 18. To change this, you should override
* this function so it returns a different value.
*
* We have followed general OpenZeppelin Contracts guidelines: functions revert
* instead returning `false` on failure. This behavior is nonetheless
* conventional and does not conflict with the expectations of ERC-20
* applications.
*/
abstract contract ERC20 is Context, IERC20, IERC20Metadata, IERC20Errors {
mapping(address account => uint256) private _balances;
mapping(address account => mapping(address spender => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the default value returned by this function, unless
* it's overridden.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - the caller must have a balance of at least `value`.
*/
function transfer(address to, uint256 value) public virtual returns (bool) {
address owner = _msgSender();
_transfer(owner, to, value);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* NOTE: If `value` is the maximum `uint256`, the allowance is not updated on
* `transferFrom`. This is semantically equivalent to an infinite approval.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 value) public virtual returns (bool) {
address owner = _msgSender();
_approve(owner, spender, value);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Skips emitting an {Approval} event indicating an allowance update. This is not
* required by the ERC. See {xref-ERC20-_approve-address-address-uint256-bool-}[_approve].
*
* NOTE: Does not update the allowance if the current allowance
* is the maximum `uint256`.
*
* Requirements:
*
* - `from` and `to` cannot be the zero address.
* - `from` must have a balance of at least `value`.
* - the caller must have allowance for ``from``'s tokens of at least
* `value`.
*/
function transferFrom(address from, address to, uint256 value) public virtual returns (bool) {
address spender = _msgSender();
_spendAllowance(from, spender, value);
_transfer(from, to, value);
return true;
}
/**
* @dev Moves a `value` amount of tokens from `from` to `to`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* NOTE: This function is not virtual, {_update} should be overridden instead.
*/
function _transfer(address from, address to, uint256 value) internal {
if (from == address(0)) {
revert ERC20InvalidSender(address(0));
}
if (to == address(0)) {
revert ERC20InvalidReceiver(address(0));
}
_update(from, to, value);
}
/**
* @dev Transfers a `value` amount of tokens from `from` to `to`, or alternatively mints (or burns) if `from`
* (or `to`) is the zero address. All customizations to transfers, mints, and burns should be done by overriding
* this function.
*
* Emits a {Transfer} event.
*/
function _update(address from, address to, uint256 value) internal virtual {
if (from == address(0)) {
// Overflow check required: The rest of the code assumes that totalSupply never overflows
_totalSupply += value;
} else {
uint256 fromBalance = _balances[from];
if (fromBalance < value) {
revert ERC20InsufficientBalance(from, fromBalance, value);
}
unchecked {
// Overflow not possible: value <= fromBalance <= totalSupply.
_balances[from] = fromBalance - value;
}
}
if (to == address(0)) {
unchecked {
// Overflow not possible: value <= totalSupply or value <= fromBalance <= totalSupply.
_totalSupply -= value;
}
} else {
unchecked {
// Overflow not possible: balance + value is at most totalSupply, which we know fits into a uint256.
_balances[to] += value;
}
}
emit Transfer(from, to, value);
}
/**
* @dev Creates a `value` amount of tokens and assigns them to `account`, by transferring it from address(0).
* Relies on the `_update` mechanism
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* NOTE: This function is not virtual, {_update} should be overridden instead.
*/
function _mint(address account, uint256 value) internal {
if (account == address(0)) {
revert ERC20InvalidReceiver(address(0));
}
_update(address(0), account, value);
}
/**
* @dev Destroys a `value` amount of tokens from `account`, lowering the total supply.
* Relies on the `_update` mechanism.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* NOTE: This function is not virtual, {_update} should be overridden instead
*/
function _burn(address account, uint256 value) internal {
if (account == address(0)) {
revert ERC20InvalidSender(address(0));
}
_update(account, address(0), value);
}
/**
* @dev Sets `value` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*
* Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.
*/
function _approve(address owner, address spender, uint256 value) internal {
_approve(owner, spender, value, true);
}
/**
* @dev Variant of {_approve} with an optional flag to enable or disable the {Approval} event.
*
* By default (when calling {_approve}) the flag is set to true. On the other hand, approval changes made by
* `_spendAllowance` during the `transferFrom` operation set the flag to false. This saves gas by not emitting any
* `Approval` event during `transferFrom` operations.
*
* Anyone who wishes to continue emitting `Approval` events on the`transferFrom` operation can force the flag to
* true using the following override:
*
* ```solidity
* function _approve(address owner, address spender, uint256 value, bool) internal virtual override {
* super._approve(owner, spender, value, true);
* }
* ```
*
* Requirements are the same as {_approve}.
*/
function _approve(address owner, address spender, uint256 value, bool emitEvent) internal virtual {
if (owner == address(0)) {
revert ERC20InvalidApprover(address(0));
}
if (spender == address(0)) {
revert ERC20InvalidSpender(address(0));
}
_allowances[owner][spender] = value;
if (emitEvent) {
emit Approval(owner, spender, value);
}
}
/**
* @dev Updates `owner` s allowance for `spender` based on spent `value`.
*
* Does not update the allowance value in case of infinite allowance.
* Revert if not enough allowance is available.
*
* Does not emit an {Approval} event.
*/
function _spendAllowance(address owner, address spender, uint256 value) internal virtual {
uint256 currentAllowance = allowance(owner, spender);
if (currentAllowance != type(uint256).max) {
if (currentAllowance < value) {
revert ERC20InsufficientAllowance(spender, currentAllowance, value);
}
unchecked {
_approve(owner, spender, currentAllowance - value, false);
}
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/ReentrancyGuard.sol)
pragma solidity ^0.8.20;
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If EIP-1153 (transient storage) is available on the chain you're deploying at,
* consider using {ReentrancyGuardTransient} instead.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant NOT_ENTERED = 1;
uint256 private constant ENTERED = 2;
uint256 private _status;
/**
* @dev Unauthorized reentrant call.
*/
error ReentrancyGuardReentrantCall();
constructor() {
_status = NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and making it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
_nonReentrantBefore();
_;
_nonReentrantAfter();
}
function _nonReentrantBefore() private {
// On the first call to nonReentrant, _status will be NOT_ENTERED
if (_status == ENTERED) {
revert ReentrancyGuardReentrantCall();
}
// Any calls to nonReentrant after this point will fail
_status = ENTERED;
}
function _nonReentrantAfter() private {
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = NOT_ENTERED;
}
/**
* @dev Returns true if the reentrancy guard is currently set to "entered", which indicates there is a
* `nonReentrant` function in the call stack.
*/
function _reentrancyGuardEntered() internal view returns (bool) {
return _status == ENTERED;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/math/Math.sol)
pragma solidity ^0.8.20;
import {Panic} from "../Panic.sol";
import {SafeCast} from "./SafeCast.sol";
/**
* @dev Standard math utilities missing in the Solidity language.
*/
library Math {
enum Rounding {
Floor, // Toward negative infinity
Ceil, // Toward positive infinity
Trunc, // Toward zero
Expand // Away from zero
}
/**
* @dev Returns the addition of two unsigned integers, with an success flag (no overflow).
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the subtraction of two unsigned integers, with an success flag (no overflow).
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an success flag (no overflow).
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a success flag (no division by zero).
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a success flag (no division by zero).
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Branchless ternary evaluation for `a ? b : c`. Gas costs are constant.
*
* IMPORTANT: This function may reduce bytecode size and consume less gas when used standalone.
* However, the compiler may optimize Solidity ternary operations (i.e. `a ? b : c`) to only compute
* one branch when needed, making this function more expensive.
*/
function ternary(bool condition, uint256 a, uint256 b) internal pure returns (uint256) {
unchecked {
// branchless ternary works because:
// b ^ (a ^ b) == a
// b ^ 0 == b
return b ^ ((a ^ b) * SafeCast.toUint(condition));
}
}
/**
* @dev Returns the largest of two numbers.
*/
function max(uint256 a, uint256 b) internal pure returns (uint256) {
return ternary(a > b, a, b);
}
/**
* @dev Returns the smallest of two numbers.
*/
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return ternary(a < b, a, b);
}
/**
* @dev Returns the average of two numbers. The result is rounded towards
* zero.
*/
function average(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b) / 2 can overflow.
return (a & b) + (a ^ b) / 2;
}
/**
* @dev Returns the ceiling of the division of two numbers.
*
* This differs from standard division with `/` in that it rounds towards infinity instead
* of rounding towards zero.
*/
function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
if (b == 0) {
// Guarantee the same behavior as in a regular Solidity division.
Panic.panic(Panic.DIVISION_BY_ZERO);
}
// The following calculation ensures accurate ceiling division without overflow.
// Since a is non-zero, (a - 1) / b will not overflow.
// The largest possible result occurs when (a - 1) / b is type(uint256).max,
// but the largest value we can obtain is type(uint256).max - 1, which happens
// when a = type(uint256).max and b = 1.
unchecked {
return SafeCast.toUint(a > 0) * ((a - 1) / b + 1);
}
}
/**
* @dev Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or
* denominator == 0.
*
* Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by
* Uniswap Labs also under MIT license.
*/
function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
unchecked {
// 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2²⁵⁶ and mod 2²⁵⁶ - 1, then use
// the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
// variables such that product = prod1 * 2²⁵⁶ + prod0.
uint256 prod0 = x * y; // Least significant 256 bits of the product
uint256 prod1; // Most significant 256 bits of the product
assembly {
let mm := mulmod(x, y, not(0))
prod1 := sub(sub(mm, prod0), lt(mm, prod0))
}
// Handle non-overflow cases, 256 by 256 division.
if (prod1 == 0) {
// Solidity will revert if denominator == 0, unlike the div opcode on its own.
// The surrounding unchecked block does not change this fact.
// See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
return prod0 / denominator;
}
// Make sure the result is less than 2²⁵⁶. Also prevents denominator == 0.
if (denominator <= prod1) {
Panic.panic(ternary(denominator == 0, Panic.DIVISION_BY_ZERO, Panic.UNDER_OVERFLOW));
}
///////////////////////////////////////////////
// 512 by 256 division.
///////////////////////////////////////////////
// Make division exact by subtracting the remainder from [prod1 prod0].
uint256 remainder;
assembly {
// Compute remainder using mulmod.
remainder := mulmod(x, y, denominator)
// Subtract 256 bit number from 512 bit number.
prod1 := sub(prod1, gt(remainder, prod0))
prod0 := sub(prod0, remainder)
}
// Factor powers of two out of denominator and compute largest power of two divisor of denominator.
// Always >= 1. See https://cs.stackexchange.com/q/138556/92363.
uint256 twos = denominator & (0 - denominator);
assembly {
// Divide denominator by twos.
denominator := div(denominator, twos)
// Divide [prod1 prod0] by twos.
prod0 := div(prod0, twos)
// Flip twos such that it is 2²⁵⁶ / twos. If twos is zero, then it becomes one.
twos := add(div(sub(0, twos), twos), 1)
}
// Shift in bits from prod1 into prod0.
prod0 |= prod1 * twos;
// Invert denominator mod 2²⁵⁶. Now that denominator is an odd number, it has an inverse modulo 2²⁵⁶ such
// that denominator * inv ≡ 1 mod 2²⁵⁶. Compute the inverse by starting with a seed that is correct for
// four bits. That is, denominator * inv ≡ 1 mod 2⁴.
uint256 inverse = (3 * denominator) ^ 2;
// Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also
// works in modular arithmetic, doubling the correct bits in each step.
inverse *= 2 - denominator * inverse; // inverse mod 2⁸
inverse *= 2 - denominator * inverse; // inverse mod 2¹⁶
inverse *= 2 - denominator * inverse; // inverse mod 2³²
inverse *= 2 - denominator * inverse; // inverse mod 2⁶⁴
inverse *= 2 - denominator * inverse; // inverse mod 2¹²⁸
inverse *= 2 - denominator * inverse; // inverse mod 2²⁵⁶
// Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
// This will give us the correct result modulo 2²⁵⁶. Since the preconditions guarantee that the outcome is
// less than 2²⁵⁶, this is the final result. We don't need to compute the high bits of the result and prod1
// is no longer required.
result = prod0 * inverse;
return result;
}
}
/**
* @dev Calculates x * y / denominator with full precision, following the selected rounding direction.
*/
function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
return mulDiv(x, y, denominator) + SafeCast.toUint(unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0);
}
/**
* @dev Calculate the modular multiplicative inverse of a number in Z/nZ.
*
* If n is a prime, then Z/nZ is a field. In that case all elements are inversible, except 0.
* If n is not a prime, then Z/nZ is not a field, and some elements might not be inversible.
*
* If the input value is not inversible, 0 is returned.
*
* NOTE: If you know for sure that n is (big) a prime, it may be cheaper to use Fermat's little theorem and get the
* inverse using `Math.modExp(a, n - 2, n)`. See {invModPrime}.
*/
function invMod(uint256 a, uint256 n) internal pure returns (uint256) {
unchecked {
if (n == 0) return 0;
// The inverse modulo is calculated using the Extended Euclidean Algorithm (iterative version)
// Used to compute integers x and y such that: ax + ny = gcd(a, n).
// When the gcd is 1, then the inverse of a modulo n exists and it's x.
// ax + ny = 1
// ax = 1 + (-y)n
// ax ≡ 1 (mod n) # x is the inverse of a modulo n
// If the remainder is 0 the gcd is n right away.
uint256 remainder = a % n;
uint256 gcd = n;
// Therefore the initial coefficients are:
// ax + ny = gcd(a, n) = n
// 0a + 1n = n
int256 x = 0;
int256 y = 1;
while (remainder != 0) {
uint256 quotient = gcd / remainder;
(gcd, remainder) = (
// The old remainder is the next gcd to try.
remainder,
// Compute the next remainder.
// Can't overflow given that (a % gcd) * (gcd // (a % gcd)) <= gcd
// where gcd is at most n (capped to type(uint256).max)
gcd - remainder * quotient
);
(x, y) = (
// Increment the coefficient of a.
y,
// Decrement the coefficient of n.
// Can overflow, but the result is casted to uint256 so that the
// next value of y is "wrapped around" to a value between 0 and n - 1.
x - y * int256(quotient)
);
}
if (gcd != 1) return 0; // No inverse exists.
return ternary(x < 0, n - uint256(-x), uint256(x)); // Wrap the result if it's negative.
}
}
/**
* @dev Variant of {invMod}. More efficient, but only works if `p` is known to be a prime greater than `2`.
*
* From https://en.wikipedia.org/wiki/Fermat%27s_little_theorem[Fermat's little theorem], we know that if p is
* prime, then `a**(p-1) ≡ 1 mod p`. As a consequence, we have `a * a**(p-2) ≡ 1 mod p`, which means that
* `a**(p-2)` is the modular multiplicative inverse of a in Fp.
*
* NOTE: this function does NOT check that `p` is a prime greater than `2`.
*/
function invModPrime(uint256 a, uint256 p) internal view returns (uint256) {
unchecked {
return Math.modExp(a, p - 2, p);
}
}
/**
* @dev Returns the modular exponentiation of the specified base, exponent and modulus (b ** e % m)
*
* Requirements:
* - modulus can't be zero
* - underlying staticcall to precompile must succeed
*
* IMPORTANT: The result is only valid if the underlying call succeeds. When using this function, make
* sure the chain you're using it on supports the precompiled contract for modular exponentiation
* at address 0x05 as specified in https://eips.ethereum.org/EIPS/eip-198[EIP-198]. Otherwise,
* the underlying function will succeed given the lack of a revert, but the result may be incorrectly
* interpreted as 0.
*/
function modExp(uint256 b, uint256 e, uint256 m) internal view returns (uint256) {
(bool success, uint256 result) = tryModExp(b, e, m);
if (!success) {
Panic.panic(Panic.DIVISION_BY_ZERO);
}
return result;
}
/**
* @dev Returns the modular exponentiation of the specified base, exponent and modulus (b ** e % m).
* It includes a success flag indicating if the operation succeeded. Operation will be marked as failed if trying
* to operate modulo 0 or if the underlying precompile reverted.
*
* IMPORTANT: The result is only valid if the success flag is true. When using this function, make sure the chain
* you're using it on supports the precompiled contract for modular exponentiation at address 0x05 as specified in
* https://eips.ethereum.org/EIPS/eip-198[EIP-198]. Otherwise, the underlying function will succeed given the lack
* of a revert, but the result may be incorrectly interpreted as 0.
*/
function tryModExp(uint256 b, uint256 e, uint256 m) internal view returns (bool success, uint256 result) {
if (m == 0) return (false, 0);
assembly ("memory-safe") {
let ptr := mload(0x40)
// | Offset | Content | Content (Hex) |
// |-----------|------------|--------------------------------------------------------------------|
// | 0x00:0x1f | size of b | 0x0000000000000000000000000000000000000000000000000000000000000020 |
// | 0x20:0x3f | size of e | 0x0000000000000000000000000000000000000000000000000000000000000020 |
// | 0x40:0x5f | size of m | 0x0000000000000000000000000000000000000000000000000000000000000020 |
// | 0x60:0x7f | value of b | 0x<.............................................................b> |
// | 0x80:0x9f | value of e | 0x<.............................................................e> |
// | 0xa0:0xbf | value of m | 0x<.............................................................m> |
mstore(ptr, 0x20)
mstore(add(ptr, 0x20), 0x20)
mstore(add(ptr, 0x40), 0x20)
mstore(add(ptr, 0x60), b)
mstore(add(ptr, 0x80), e)
mstore(add(ptr, 0xa0), m)
// Given the result < m, it's guaranteed to fit in 32 bytes,
// so we can use the memory scratch space located at offset 0.
success := staticcall(gas(), 0x05, ptr, 0xc0, 0x00, 0x20)
result := mload(0x00)
}
}
/**
* @dev Variant of {modExp} that supports inputs of arbitrary length.
*/
function modExp(bytes memory b, bytes memory e, bytes memory m) internal view returns (bytes memory) {
(bool success, bytes memory result) = tryModExp(b, e, m);
if (!success) {
Panic.panic(Panic.DIVISION_BY_ZERO);
}
return result;
}
/**
* @dev Variant of {tryModExp} that supports inputs of arbitrary length.
*/
function tryModExp(
bytes memory b,
bytes memory e,
bytes memory m
) internal view returns (bool success, bytes memory result) {
if (_zeroBytes(m)) return (false, new bytes(0));
uint256 mLen = m.length;
// Encode call args in result and move the free memory pointer
result = abi.encodePacked(b.length, e.length, mLen, b, e, m);
assembly ("memory-safe") {
let dataPtr := add(result, 0x20)
// Write result on top of args to avoid allocating extra memory.
success := staticcall(gas(), 0x05, dataPtr, mload(result), dataPtr, mLen)
// Overwrite the length.
// result.length > returndatasize() is guaranteed because returndatasize() == m.length
mstore(result, mLen)
// Set the memory pointer after the returned data.
mstore(0x40, add(dataPtr, mLen))
}
}
/**
* @dev Returns whether the provided byte array is zero.
*/
function _zeroBytes(bytes memory byteArray) private pure returns (bool) {
for (uint256 i = 0; i < byteArray.length; ++i) {
if (byteArray[i] != 0) {
return false;
}
}
return true;
}
/**
* @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded
* towards zero.
*
* This method is based on Newton's method for computing square roots; the algorithm is restricted to only
* using integer operations.
*/
function sqrt(uint256 a) internal pure returns (uint256) {
unchecked {
// Take care of easy edge cases when a == 0 or a == 1
if (a <= 1) {
return a;
}
// In this function, we use Newton's method to get a root of `f(x) := x² - a`. It involves building a
// sequence x_n that converges toward sqrt(a). For each iteration x_n, we also define the error between
// the current value as `ε_n = | x_n - sqrt(a) |`.
//
// For our first estimation, we consider `e` the smallest power of 2 which is bigger than the square root
// of the target. (i.e. `2**(e-1) ≤ sqrt(a) < 2**e`). We know that `e ≤ 128` because `(2¹²⁸)² = 2²⁵⁶` is
// bigger than any uint256.
//
// By noticing that
// `2**(e-1) ≤ sqrt(a) < 2**e → (2**(e-1))² ≤ a < (2**e)² → 2**(2*e-2) ≤ a < 2**(2*e)`
// we can deduce that `e - 1` is `log2(a) / 2`. We can thus compute `x_n = 2**(e-1)` using a method similar
// to the msb function.
uint256 aa = a;
uint256 xn = 1;
if (aa >= (1 << 128)) {
aa >>= 128;
xn <<= 64;
}
if (aa >= (1 << 64)) {
aa >>= 64;
xn <<= 32;
}
if (aa >= (1 << 32)) {
aa >>= 32;
xn <<= 16;
}
if (aa >= (1 << 16)) {
aa >>= 16;
xn <<= 8;
}
if (aa >= (1 << 8)) {
aa >>= 8;
xn <<= 4;
}
if (aa >= (1 << 4)) {
aa >>= 4;
xn <<= 2;
}
if (aa >= (1 << 2)) {
xn <<= 1;
}
// We now have x_n such that `x_n = 2**(e-1) ≤ sqrt(a) < 2**e = 2 * x_n`. This implies ε_n ≤ 2**(e-1).
//
// We can refine our estimation by noticing that the middle of that interval minimizes the error.
// If we move x_n to equal 2**(e-1) + 2**(e-2), then we reduce the error to ε_n ≤ 2**(e-2).
// This is going to be our x_0 (and ε_0)
xn = (3 * xn) >> 1; // ε_0 := | x_0 - sqrt(a) | ≤ 2**(e-2)
// From here, Newton's method give us:
// x_{n+1} = (x_n + a / x_n) / 2
//
// One should note that:
// x_{n+1}² - a = ((x_n + a / x_n) / 2)² - a
// = ((x_n² + a) / (2 * x_n))² - a
// = (x_n⁴ + 2 * a * x_n² + a²) / (4 * x_n²) - a
// = (x_n⁴ + 2 * a * x_n² + a² - 4 * a * x_n²) / (4 * x_n²)
// = (x_n⁴ - 2 * a * x_n² + a²) / (4 * x_n²)
// = (x_n² - a)² / (2 * x_n)²
// = ((x_n² - a) / (2 * x_n))²
// ≥ 0
// Which proves that for all n ≥ 1, sqrt(a) ≤ x_n
//
// This gives us the proof of quadratic convergence of the sequence:
// ε_{n+1} = | x_{n+1} - sqrt(a) |
// = | (x_n + a / x_n) / 2 - sqrt(a) |
// = | (x_n² + a - 2*x_n*sqrt(a)) / (2 * x_n) |
// = | (x_n - sqrt(a))² / (2 * x_n) |
// = | ε_n² / (2 * x_n) |
// = ε_n² / | (2 * x_n) |
//
// For the first iteration, we have a special case where x_0 is known:
// ε_1 = ε_0² / | (2 * x_0) |
// ≤ (2**(e-2))² / (2 * (2**(e-1) + 2**(e-2)))
// ≤ 2**(2*e-4) / (3 * 2**(e-1))
// ≤ 2**(e-3) / 3
// ≤ 2**(e-3-log2(3))
// ≤ 2**(e-4.5)
//
// For the following iterations, we use the fact that, 2**(e-1) ≤ sqrt(a) ≤ x_n:
// ε_{n+1} = ε_n² / | (2 * x_n) |
// ≤ (2**(e-k))² / (2 * 2**(e-1))
// ≤ 2**(2*e-2*k) / 2**e
// ≤ 2**(e-2*k)
xn = (xn + a / xn) >> 1; // ε_1 := | x_1 - sqrt(a) | ≤ 2**(e-4.5) -- special case, see above
xn = (xn + a / xn) >> 1; // ε_2 := | x_2 - sqrt(a) | ≤ 2**(e-9) -- general case with k = 4.5
xn = (xn + a / xn) >> 1; // ε_3 := | x_3 - sqrt(a) | ≤ 2**(e-18) -- general case with k = 9
xn = (xn + a / xn) >> 1; // ε_4 := | x_4 - sqrt(a) | ≤ 2**(e-36) -- general case with k = 18
xn = (xn + a / xn) >> 1; // ε_5 := | x_5 - sqrt(a) | ≤ 2**(e-72) -- general case with k = 36
xn = (xn + a / xn) >> 1; // ε_6 := | x_6 - sqrt(a) | ≤ 2**(e-144) -- general case with k = 72
// Because e ≤ 128 (as discussed during the first estimation phase), we know have reached a precision
// ε_6 ≤ 2**(e-144) < 1. Given we're operating on integers, then we can ensure that xn is now either
// sqrt(a) or sqrt(a) + 1.
return xn - SafeCast.toUint(xn > a / xn);
}
}
/**
* @dev Calculates sqrt(a), following the selected rounding direction.
*/
function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = sqrt(a);
return result + SafeCast.toUint(unsignedRoundsUp(rounding) && result * result < a);
}
}
/**
* @dev Return the log in base 2 of a positive value rounded towards zero.
* Returns 0 if given 0.
*/
function log2(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
uint256 exp;
unchecked {
exp = 128 * SafeCast.toUint(value > (1 << 128) - 1);
value >>= exp;
result += exp;
exp = 64 * SafeCast.toUint(value > (1 << 64) - 1);
value >>= exp;
result += exp;
exp = 32 * SafeCast.toUint(value > (1 << 32) - 1);
value >>= exp;
result += exp;
exp = 16 * SafeCast.toUint(value > (1 << 16) - 1);
value >>= exp;
result += exp;
exp = 8 * SafeCast.toUint(value > (1 << 8) - 1);
value >>= exp;
result += exp;
exp = 4 * SafeCast.toUint(value > (1 << 4) - 1);
value >>= exp;
result += exp;
exp = 2 * SafeCast.toUint(value > (1 << 2) - 1);
value >>= exp;
result += exp;
result += SafeCast.toUint(value > 1);
}
return result;
}
/**
* @dev Return the log in base 2, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log2(value);
return result + SafeCast.toUint(unsignedRoundsUp(rounding) && 1 << result < value);
}
}
/**
* @dev Return the log in base 10 of a positive value rounded towards zero.
* Returns 0 if given 0.
*/
function log10(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >= 10 ** 64) {
value /= 10 ** 64;
result += 64;
}
if (value >= 10 ** 32) {
value /= 10 ** 32;
result += 32;
}
if (value >= 10 ** 16) {
value /= 10 ** 16;
result += 16;
}
if (value >= 10 ** 8) {
value /= 10 ** 8;
result += 8;
}
if (value >= 10 ** 4) {
value /= 10 ** 4;
result += 4;
}
if (value >= 10 ** 2) {
value /= 10 ** 2;
result += 2;
}
if (value >= 10 ** 1) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 10, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log10(value);
return result + SafeCast.toUint(unsignedRoundsUp(rounding) && 10 ** result < value);
}
}
/**
* @dev Return the log in base 256 of a positive value rounded towards zero.
* Returns 0 if given 0.
*
* Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
*/
function log256(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
uint256 isGt;
unchecked {
isGt = SafeCast.toUint(value > (1 << 128) - 1);
value >>= isGt * 128;
result += isGt * 16;
isGt = SafeCast.toUint(value > (1 << 64) - 1);
value >>= isGt * 64;
result += isGt * 8;
isGt = SafeCast.toUint(value > (1 << 32) - 1);
value >>= isGt * 32;
result += isGt * 4;
isGt = SafeCast.toUint(value > (1 << 16) - 1);
value >>= isGt * 16;
result += isGt * 2;
result += SafeCast.toUint(value > (1 << 8) - 1);
}
return result;
}
/**
* @dev Return the log in base 256, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log256(value);
return result + SafeCast.toUint(unsignedRoundsUp(rounding) && 1 << (result << 3) < value);
}
}
/**
* @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.
*/
function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {
return uint8(rounding) % 2 == 1;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.26;
import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import {IERC20Metadata} from "@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol";
import {IERC20Permit} from "@openzeppelin/contracts/token/ERC20/extensions/IERC20Permit.sol";
interface IERC20Extended is IERC20, IERC20Metadata, IERC20Permit {
function mint(address account, uint256 amount) external;
function burn(uint256 amount) external;
function transfer(address to, uint256 value) external returns (bool);
function transferFrom(
address from,
address to,
uint256 value
) external returns (bool);
function burnFrom(address account, uint256 value) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.26;
// a library for handling binary fixed point numbers (https://en.wikipedia.org/wiki/Q_(number_format))
// range: [0, 2**112 - 1]
// resolution: 1 / 2**112
library UQ112x112 {
uint224 constant Q112 = 2 ** 112;
// encode a uint112 as a UQ112x112
function encode(uint112 y) internal pure returns (uint224 z) {
unchecked {
z = uint224(y) * Q112; // never overflows
}
}
// divide a UQ112x112 by a uint112, returning a UQ112x112
function uqdiv(uint224 x, uint112 y) internal pure returns (uint224 z) {
unchecked {
z = x / uint224(y);
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.26;
interface IPairCallee {
function hook(
address sender,
uint256 amount0,
uint256 amount1,
bytes calldata data
) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.20;
/**
* @dev Interface of the ERC-20 standard as defined in the ERC.
*/
interface IERC20 {
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
/**
* @dev Returns the value of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the value of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves a `value` amount of tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 value) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets a `value` amount of tokens as the allowance of `spender` over the
* caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 value) external returns (bool);
/**
* @dev Moves a `value` amount of tokens from `from` to `to` using the
* allowance mechanism. `value` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address from, address to, uint256 value) external returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (token/ERC20/extensions/IERC20Metadata.sol)
pragma solidity ^0.8.20;
import {IERC20} from "../IERC20.sol";
/**
* @dev Interface for the optional metadata functions from the ERC-20 standard.
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)
pragma solidity ^0.8.20;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
function _contextSuffixLength() internal view virtual returns (uint256) {
return 0;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (interfaces/draft-IERC6093.sol)
pragma solidity ^0.8.20;
/**
* @dev Standard ERC-20 Errors
* Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC-20 tokens.
*/
interface IERC20Errors {
/**
* @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
* @param sender Address whose tokens are being transferred.
* @param balance Current balance for the interacting account.
* @param needed Minimum amount required to perform a transfer.
*/
error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);
/**
* @dev Indicates a failure with the token `sender`. Used in transfers.
* @param sender Address whose tokens are being transferred.
*/
error ERC20InvalidSender(address sender);
/**
* @dev Indicates a failure with the token `receiver`. Used in transfers.
* @param receiver Address to which tokens are being transferred.
*/
error ERC20InvalidReceiver(address receiver);
/**
* @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.
* @param spender Address that may be allowed to operate on tokens without being their owner.
* @param allowance Amount of tokens a `spender` is allowed to operate with.
* @param needed Minimum amount required to perform a transfer.
*/
error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);
/**
* @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
* @param approver Address initiating an approval operation.
*/
error ERC20InvalidApprover(address approver);
/**
* @dev Indicates a failure with the `spender` to be approved. Used in approvals.
* @param spender Address that may be allowed to operate on tokens without being their owner.
*/
error ERC20InvalidSpender(address spender);
}
/**
* @dev Standard ERC-721 Errors
* Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC-721 tokens.
*/
interface IERC721Errors {
/**
* @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in ERC-20.
* Used in balance queries.
* @param owner Address of the current owner of a token.
*/
error ERC721InvalidOwner(address owner);
/**
* @dev Indicates a `tokenId` whose `owner` is the zero address.
* @param tokenId Identifier number of a token.
*/
error ERC721NonexistentToken(uint256 tokenId);
/**
* @dev Indicates an error related to the ownership over a particular token. Used in transfers.
* @param sender Address whose tokens are being transferred.
* @param tokenId Identifier number of a token.
* @param owner Address of the current owner of a token.
*/
error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);
/**
* @dev Indicates a failure with the token `sender`. Used in transfers.
* @param sender Address whose tokens are being transferred.
*/
error ERC721InvalidSender(address sender);
/**
* @dev Indicates a failure with the token `receiver`. Used in transfers.
* @param receiver Address to which tokens are being transferred.
*/
error ERC721InvalidReceiver(address receiver);
/**
* @dev Indicates a failure with the `operator`’s approval. Used in transfers.
* @param operator Address that may be allowed to operate on tokens without being their owner.
* @param tokenId Identifier number of a token.
*/
error ERC721InsufficientApproval(address operator, uint256 tokenId);
/**
* @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
* @param approver Address initiating an approval operation.
*/
error ERC721InvalidApprover(address approver);
/**
* @dev Indicates a failure with the `operator` to be approved. Used in approvals.
* @param operator Address that may be allowed to operate on tokens without being their owner.
*/
error ERC721InvalidOperator(address operator);
}
/**
* @dev Standard ERC-1155 Errors
* Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC-1155 tokens.
*/
interface IERC1155Errors {
/**
* @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
* @param sender Address whose tokens are being transferred.
* @param balance Current balance for the interacting account.
* @param needed Minimum amount required to perform a transfer.
* @param tokenId Identifier number of a token.
*/
error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);
/**
* @dev Indicates a failure with the token `sender`. Used in transfers.
* @param sender Address whose tokens are being transferred.
*/
error ERC1155InvalidSender(address sender);
/**
* @dev Indicates a failure with the token `receiver`. Used in transfers.
* @param receiver Address to which tokens are being transferred.
*/
error ERC1155InvalidReceiver(address receiver);
/**
* @dev Indicates a failure with the `operator`’s approval. Used in transfers.
* @param operator Address that may be allowed to operate on tokens without being their owner.
* @param owner Address of the current owner of a token.
*/
error ERC1155MissingApprovalForAll(address operator, address owner);
/**
* @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
* @param approver Address initiating an approval operation.
*/
error ERC1155InvalidApprover(address approver);
/**
* @dev Indicates a failure with the `operator` to be approved. Used in approvals.
* @param operator Address that may be allowed to operate on tokens without being their owner.
*/
error ERC1155InvalidOperator(address operator);
/**
* @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.
* Used in batch transfers.
* @param idsLength Length of the array of token identifiers
* @param valuesLength Length of the array of token amounts
*/
error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/Panic.sol)
pragma solidity ^0.8.20;
/**
* @dev Helper library for emitting standardized panic codes.
*
* ```solidity
* contract Example {
* using Panic for uint256;
*
* // Use any of the declared internal constants
* function foo() { Panic.GENERIC.panic(); }
*
* // Alternatively
* function foo() { Panic.panic(Panic.GENERIC); }
* }
* ```
*
* Follows the list from https://github.com/ethereum/solidity/blob/v0.8.24/libsolutil/ErrorCodes.h[libsolutil].
*
* _Available since v5.1._
*/
// slither-disable-next-line unused-state
library Panic {
/// @dev generic / unspecified error
uint256 internal constant GENERIC = 0x00;
/// @dev used by the assert() builtin
uint256 internal constant ASSERT = 0x01;
/// @dev arithmetic underflow or overflow
uint256 internal constant UNDER_OVERFLOW = 0x11;
/// @dev division or modulo by zero
uint256 internal constant DIVISION_BY_ZERO = 0x12;
/// @dev enum conversion error
uint256 internal constant ENUM_CONVERSION_ERROR = 0x21;
/// @dev invalid encoding in storage
uint256 internal constant STORAGE_ENCODING_ERROR = 0x22;
/// @dev empty array pop
uint256 internal constant EMPTY_ARRAY_POP = 0x31;
/// @dev array out of bounds access
uint256 internal constant ARRAY_OUT_OF_BOUNDS = 0x32;
/// @dev resource error (too large allocation or too large array)
uint256 internal constant RESOURCE_ERROR = 0x41;
/// @dev calling invalid internal function
uint256 internal constant INVALID_INTERNAL_FUNCTION = 0x51;
/// @dev Reverts with a panic code. Recommended to use with
/// the internal constants with predefined codes.
function panic(uint256 code) internal pure {
assembly ("memory-safe") {
mstore(0x00, 0x4e487b71)
mstore(0x20, code)
revert(0x1c, 0x24)
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/math/SafeCast.sol)
// This file was procedurally generated from scripts/generate/templates/SafeCast.js.
pragma solidity ^0.8.20;
/**
* @dev Wrappers over Solidity's uintXX/intXX/bool casting operators with added overflow
* checks.
*
* Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
* easily result in undesired exploitation or bugs, since developers usually
* assume that overflows raise errors. `SafeCast` restores this intuition by
* reverting the transaction when such an operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeCast {
/**
* @dev Value doesn't fit in an uint of `bits` size.
*/
error SafeCastOverflowedUintDowncast(uint8 bits, uint256 value);
/**
* @dev An int value doesn't fit in an uint of `bits` size.
*/
error SafeCastOverflowedIntToUint(int256 value);
/**
* @dev Value doesn't fit in an int of `bits` size.
*/
error SafeCastOverflowedIntDowncast(uint8 bits, int256 value);
/**
* @dev An uint value doesn't fit in an int of `bits` size.
*/
error SafeCastOverflowedUintToInt(uint256 value);
/**
* @dev Returns the downcasted uint248 from uint256, reverting on
* overflow (when the input is greater than largest uint248).
*
* Counterpart to Solidity's `uint248` operator.
*
* Requirements:
*
* - input must fit into 248 bits
*/
function toUint248(uint256 value) internal pure returns (uint248) {
if (value > type(uint248).max) {
revert SafeCastOverflowedUintDowncast(248, value);
}
return uint248(value);
}
/**
* @dev Returns the downcasted uint240 from uint256, reverting on
* overflow (when the input is greater than largest uint240).
*
* Counterpart to Solidity's `uint240` operator.
*
* Requirements:
*
* - input must fit into 240 bits
*/
function toUint240(uint256 value) internal pure returns (uint240) {
if (value > type(uint240).max) {
revert SafeCastOverflowedUintDowncast(240, value);
}
return uint240(value);
}
/**
* @dev Returns the downcasted uint232 from uint256, reverting on
* overflow (when the input is greater than largest uint232).
*
* Counterpart to Solidity's `uint232` operator.
*
* Requirements:
*
* - input must fit into 232 bits
*/
function toUint232(uint256 value) internal pure returns (uint232) {
if (value > type(uint232).max) {
revert SafeCastOverflowedUintDowncast(232, value);
}
return uint232(value);
}
/**
* @dev Returns the downcasted uint224 from uint256, reverting on
* overflow (when the input is greater than largest uint224).
*
* Counterpart to Solidity's `uint224` operator.
*
* Requirements:
*
* - input must fit into 224 bits
*/
function toUint224(uint256 value) internal pure returns (uint224) {
if (value > type(uint224).max) {
revert SafeCastOverflowedUintDowncast(224, value);
}
return uint224(value);
}
/**
* @dev Returns the downcasted uint216 from uint256, reverting on
* overflow (when the input is greater than largest uint216).
*
* Counterpart to Solidity's `uint216` operator.
*
* Requirements:
*
* - input must fit into 216 bits
*/
function toUint216(uint256 value) internal pure returns (uint216) {
if (value > type(uint216).max) {
revert SafeCastOverflowedUintDowncast(216, value);
}
return uint216(value);
}
/**
* @dev Returns the downcasted uint208 from uint256, reverting on
* overflow (when the input is greater than largest uint208).
*
* Counterpart to Solidity's `uint208` operator.
*
* Requirements:
*
* - input must fit into 208 bits
*/
function toUint208(uint256 value) internal pure returns (uint208) {
if (value > type(uint208).max) {
revert SafeCastOverflowedUintDowncast(208, value);
}
return uint208(value);
}
/**
* @dev Returns the downcasted uint200 from uint256, reverting on
* overflow (when the input is greater than largest uint200).
*
* Counterpart to Solidity's `uint200` operator.
*
* Requirements:
*
* - input must fit into 200 bits
*/
function toUint200(uint256 value) internal pure returns (uint200) {
if (value > type(uint200).max) {
revert SafeCastOverflowedUintDowncast(200, value);
}
return uint200(value);
}
/**
* @dev Returns the downcasted uint192 from uint256, reverting on
* overflow (when the input is greater than largest uint192).
*
* Counterpart to Solidity's `uint192` operator.
*
* Requirements:
*
* - input must fit into 192 bits
*/
function toUint192(uint256 value) internal pure returns (uint192) {
if (value > type(uint192).max) {
revert SafeCastOverflowedUintDowncast(192, value);
}
return uint192(value);
}
/**
* @dev Returns the downcasted uint184 from uint256, reverting on
* overflow (when the input is greater than largest uint184).
*
* Counterpart to Solidity's `uint184` operator.
*
* Requirements:
*
* - input must fit into 184 bits
*/
function toUint184(uint256 value) internal pure returns (uint184) {
if (value > type(uint184).max) {
revert SafeCastOverflowedUintDowncast(184, value);
}
return uint184(value);
}
/**
* @dev Returns the downcasted uint176 from uint256, reverting on
* overflow (when the input is greater than largest uint176).
*
* Counterpart to Solidity's `uint176` operator.
*
* Requirements:
*
* - input must fit into 176 bits
*/
function toUint176(uint256 value) internal pure returns (uint176) {
if (value > type(uint176).max) {
revert SafeCastOverflowedUintDowncast(176, value);
}
return uint176(value);
}
/**
* @dev Returns the downcasted uint168 from uint256, reverting on
* overflow (when the input is greater than largest uint168).
*
* Counterpart to Solidity's `uint168` operator.
*
* Requirements:
*
* - input must fit into 168 bits
*/
function toUint168(uint256 value) internal pure returns (uint168) {
if (value > type(uint168).max) {
revert SafeCastOverflowedUintDowncast(168, value);
}
return uint168(value);
}
/**
* @dev Returns the downcasted uint160 from uint256, reverting on
* overflow (when the input is greater than largest uint160).
*
* Counterpart to Solidity's `uint160` operator.
*
* Requirements:
*
* - input must fit into 160 bits
*/
function toUint160(uint256 value) internal pure returns (uint160) {
if (value > type(uint160).max) {
revert SafeCastOverflowedUintDowncast(160, value);
}
return uint160(value);
}
/**
* @dev Returns the downcasted uint152 from uint256, reverting on
* overflow (when the input is greater than largest uint152).
*
* Counterpart to Solidity's `uint152` operator.
*
* Requirements:
*
* - input must fit into 152 bits
*/
function toUint152(uint256 value) internal pure returns (uint152) {
if (value > type(uint152).max) {
revert SafeCastOverflowedUintDowncast(152, value);
}
return uint152(value);
}
/**
* @dev Returns the downcasted uint144 from uint256, reverting on
* overflow (when the input is greater than largest uint144).
*
* Counterpart to Solidity's `uint144` operator.
*
* Requirements:
*
* - input must fit into 144 bits
*/
function toUint144(uint256 value) internal pure returns (uint144) {
if (value > type(uint144).max) {
revert SafeCastOverflowedUintDowncast(144, value);
}
return uint144(value);
}
/**
* @dev Returns the downcasted uint136 from uint256, reverting on
* overflow (when the input is greater than largest uint136).
*
* Counterpart to Solidity's `uint136` operator.
*
* Requirements:
*
* - input must fit into 136 bits
*/
function toUint136(uint256 value) internal pure returns (uint136) {
if (value > type(uint136).max) {
revert SafeCastOverflowedUintDowncast(136, value);
}
return uint136(value);
}
/**
* @dev Returns the downcasted uint128 from uint256, reverting on
* overflow (when the input is greater than largest uint128).
*
* Counterpart to Solidity's `uint128` operator.
*
* Requirements:
*
* - input must fit into 128 bits
*/
function toUint128(uint256 value) internal pure returns (uint128) {
if (value > type(uint128).max) {
revert SafeCastOverflowedUintDowncast(128, value);
}
return uint128(value);
}
/**
* @dev Returns the downcasted uint120 from uint256, reverting on
* overflow (when the input is greater than largest uint120).
*
* Counterpart to Solidity's `uint120` operator.
*
* Requirements:
*
* - input must fit into 120 bits
*/
function toUint120(uint256 value) internal pure returns (uint120) {
if (value > type(uint120).max) {
revert SafeCastOverflowedUintDowncast(120, value);
}
return uint120(value);
}
/**
* @dev Returns the downcasted uint112 from uint256, reverting on
* overflow (when the input is greater than largest uint112).
*
* Counterpart to Solidity's `uint112` operator.
*
* Requirements:
*
* - input must fit into 112 bits
*/
function toUint112(uint256 value) internal pure returns (uint112) {
if (value > type(uint112).max) {
revert SafeCastOverflowedUintDowncast(112, value);
}
return uint112(value);
}
/**
* @dev Returns the downcasted uint104 from uint256, reverting on
* overflow (when the input is greater than largest uint104).
*
* Counterpart to Solidity's `uint104` operator.
*
* Requirements:
*
* - input must fit into 104 bits
*/
function toUint104(uint256 value) internal pure returns (uint104) {
if (value > type(uint104).max) {
revert SafeCastOverflowedUintDowncast(104, value);
}
return uint104(value);
}
/**
* @dev Returns the downcasted uint96 from uint256, reverting on
* overflow (when the input is greater than largest uint96).
*
* Counterpart to Solidity's `uint96` operator.
*
* Requirements:
*
* - input must fit into 96 bits
*/
function toUint96(uint256 value) internal pure returns (uint96) {
if (value > type(uint96).max) {
revert SafeCastOverflowedUintDowncast(96, value);
}
return uint96(value);
}
/**
* @dev Returns the downcasted uint88 from uint256, reverting on
* overflow (when the input is greater than largest uint88).
*
* Counterpart to Solidity's `uint88` operator.
*
* Requirements:
*
* - input must fit into 88 bits
*/
function toUint88(uint256 value) internal pure returns (uint88) {
if (value > type(uint88).max) {
revert SafeCastOverflowedUintDowncast(88, value);
}
return uint88(value);
}
/**
* @dev Returns the downcasted uint80 from uint256, reverting on
* overflow (when the input is greater than largest uint80).
*
* Counterpart to Solidity's `uint80` operator.
*
* Requirements:
*
* - input must fit into 80 bits
*/
function toUint80(uint256 value) internal pure returns (uint80) {
if (value > type(uint80).max) {
revert SafeCastOverflowedUintDowncast(80, value);
}
return uint80(value);
}
/**
* @dev Returns the downcasted uint72 from uint256, reverting on
* overflow (when the input is greater than largest uint72).
*
* Counterpart to Solidity's `uint72` operator.
*
* Requirements:
*
* - input must fit into 72 bits
*/
function toUint72(uint256 value) internal pure returns (uint72) {
if (value > type(uint72).max) {
revert SafeCastOverflowedUintDowncast(72, value);
}
return uint72(value);
}
/**
* @dev Returns the downcasted uint64 from uint256, reverting on
* overflow (when the input is greater than largest uint64).
*
* Counterpart to Solidity's `uint64` operator.
*
* Requirements:
*
* - input must fit into 64 bits
*/
function toUint64(uint256 value) internal pure returns (uint64) {
if (value > type(uint64).max) {
revert SafeCastOverflowedUintDowncast(64, value);
}
return uint64(value);
}
/**
* @dev Returns the downcasted uint56 from uint256, reverting on
* overflow (when the input is greater than largest uint56).
*
* Counterpart to Solidity's `uint56` operator.
*
* Requirements:
*
* - input must fit into 56 bits
*/
function toUint56(uint256 value) internal pure returns (uint56) {
if (value > type(uint56).max) {
revert SafeCastOverflowedUintDowncast(56, value);
}
return uint56(value);
}
/**
* @dev Returns the downcasted uint48 from uint256, reverting on
* overflow (when the input is greater than largest uint48).
*
* Counterpart to Solidity's `uint48` operator.
*
* Requirements:
*
* - input must fit into 48 bits
*/
function toUint48(uint256 value) internal pure returns (uint48) {
if (value > type(uint48).max) {
revert SafeCastOverflowedUintDowncast(48, value);
}
return uint48(value);
}
/**
* @dev Returns the downcasted uint40 from uint256, reverting on
* overflow (when the input is greater than largest uint40).
*
* Counterpart to Solidity's `uint40` operator.
*
* Requirements:
*
* - input must fit into 40 bits
*/
function toUint40(uint256 value) internal pure returns (uint40) {
if (value > type(uint40).max) {
revert SafeCastOverflowedUintDowncast(40, value);
}
return uint40(value);
}
/**
* @dev Returns the downcasted uint32 from uint256, reverting on
* overflow (when the input is greater than largest uint32).
*
* Counterpart to Solidity's `uint32` operator.
*
* Requirements:
*
* - input must fit into 32 bits
*/
function toUint32(uint256 value) internal pure returns (uint32) {
if (value > type(uint32).max) {
revert SafeCastOverflowedUintDowncast(32, value);
}
return uint32(value);
}
/**
* @dev Returns the downcasted uint24 from uint256, reverting on
* overflow (when the input is greater than largest uint24).
*
* Counterpart to Solidity's `uint24` operator.
*
* Requirements:
*
* - input must fit into 24 bits
*/
function toUint24(uint256 value) internal pure returns (uint24) {
if (value > type(uint24).max) {
revert SafeCastOverflowedUintDowncast(24, value);
}
return uint24(value);
}
/**
* @dev Returns the downcasted uint16 from uint256, reverting on
* overflow (when the input is greater than largest uint16).
*
* Counterpart to Solidity's `uint16` operator.
*
* Requirements:
*
* - input must fit into 16 bits
*/
function toUint16(uint256 value) internal pure returns (uint16) {
if (value > type(uint16).max) {
revert SafeCastOverflowedUintDowncast(16, value);
}
return uint16(value);
}
/**
* @dev Returns the downcasted uint8 from uint256, reverting on
* overflow (when the input is greater than largest uint8).
*
* Counterpart to Solidity's `uint8` operator.
*
* Requirements:
*
* - input must fit into 8 bits
*/
function toUint8(uint256 value) internal pure returns (uint8) {
if (value > type(uint8).max) {
revert SafeCastOverflowedUintDowncast(8, value);
}
return uint8(value);
}
/**
* @dev Converts a signed int256 into an unsigned uint256.
*
* Requirements:
*
* - input must be greater than or equal to 0.
*/
function toUint256(int256 value) internal pure returns (uint256) {
if (value < 0) {
revert SafeCastOverflowedIntToUint(value);
}
return uint256(value);
}
/**
* @dev Returns the downcasted int248 from int256, reverting on
* overflow (when the input is less than smallest int248 or
* greater than largest int248).
*
* Counterpart to Solidity's `int248` operator.
*
* Requirements:
*
* - input must fit into 248 bits
*/
function toInt248(int256 value) internal pure returns (int248 downcasted) {
downcasted = int248(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(248, value);
}
}
/**
* @dev Returns the downcasted int240 from int256, reverting on
* overflow (when the input is less than smallest int240 or
* greater than largest int240).
*
* Counterpart to Solidity's `int240` operator.
*
* Requirements:
*
* - input must fit into 240 bits
*/
function toInt240(int256 value) internal pure returns (int240 downcasted) {
downcasted = int240(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(240, value);
}
}
/**
* @dev Returns the downcasted int232 from int256, reverting on
* overflow (when the input is less than smallest int232 or
* greater than largest int232).
*
* Counterpart to Solidity's `int232` operator.
*
* Requirements:
*
* - input must fit into 232 bits
*/
function toInt232(int256 value) internal pure returns (int232 downcasted) {
downcasted = int232(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(232, value);
}
}
/**
* @dev Returns the downcasted int224 from int256, reverting on
* overflow (when the input is less than smallest int224 or
* greater than largest int224).
*
* Counterpart to Solidity's `int224` operator.
*
* Requirements:
*
* - input must fit into 224 bits
*/
function toInt224(int256 value) internal pure returns (int224 downcasted) {
downcasted = int224(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(224, value);
}
}
/**
* @dev Returns the downcasted int216 from int256, reverting on
* overflow (when the input is less than smallest int216 or
* greater than largest int216).
*
* Counterpart to Solidity's `int216` operator.
*
* Requirements:
*
* - input must fit into 216 bits
*/
function toInt216(int256 value) internal pure returns (int216 downcasted) {
downcasted = int216(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(216, value);
}
}
/**
* @dev Returns the downcasted int208 from int256, reverting on
* overflow (when the input is less than smallest int208 or
* greater than largest int208).
*
* Counterpart to Solidity's `int208` operator.
*
* Requirements:
*
* - input must fit into 208 bits
*/
function toInt208(int256 value) internal pure returns (int208 downcasted) {
downcasted = int208(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(208, value);
}
}
/**
* @dev Returns the downcasted int200 from int256, reverting on
* overflow (when the input is less than smallest int200 or
* greater than largest int200).
*
* Counterpart to Solidity's `int200` operator.
*
* Requirements:
*
* - input must fit into 200 bits
*/
function toInt200(int256 value) internal pure returns (int200 downcasted) {
downcasted = int200(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(200, value);
}
}
/**
* @dev Returns the downcasted int192 from int256, reverting on
* overflow (when the input is less than smallest int192 or
* greater than largest int192).
*
* Counterpart to Solidity's `int192` operator.
*
* Requirements:
*
* - input must fit into 192 bits
*/
function toInt192(int256 value) internal pure returns (int192 downcasted) {
downcasted = int192(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(192, value);
}
}
/**
* @dev Returns the downcasted int184 from int256, reverting on
* overflow (when the input is less than smallest int184 or
* greater than largest int184).
*
* Counterpart to Solidity's `int184` operator.
*
* Requirements:
*
* - input must fit into 184 bits
*/
function toInt184(int256 value) internal pure returns (int184 downcasted) {
downcasted = int184(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(184, value);
}
}
/**
* @dev Returns the downcasted int176 from int256, reverting on
* overflow (when the input is less than smallest int176 or
* greater than largest int176).
*
* Counterpart to Solidity's `int176` operator.
*
* Requirements:
*
* - input must fit into 176 bits
*/
function toInt176(int256 value) internal pure returns (int176 downcasted) {
downcasted = int176(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(176, value);
}
}
/**
* @dev Returns the downcasted int168 from int256, reverting on
* overflow (when the input is less than smallest int168 or
* greater than largest int168).
*
* Counterpart to Solidity's `int168` operator.
*
* Requirements:
*
* - input must fit into 168 bits
*/
function toInt168(int256 value) internal pure returns (int168 downcasted) {
downcasted = int168(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(168, value);
}
}
/**
* @dev Returns the downcasted int160 from int256, reverting on
* overflow (when the input is less than smallest int160 or
* greater than largest int160).
*
* Counterpart to Solidity's `int160` operator.
*
* Requirements:
*
* - input must fit into 160 bits
*/
function toInt160(int256 value) internal pure returns (int160 downcasted) {
downcasted = int160(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(160, value);
}
}
/**
* @dev Returns the downcasted int152 from int256, reverting on
* overflow (when the input is less than smallest int152 or
* greater than largest int152).
*
* Counterpart to Solidity's `int152` operator.
*
* Requirements:
*
* - input must fit into 152 bits
*/
function toInt152(int256 value) internal pure returns (int152 downcasted) {
downcasted = int152(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(152, value);
}
}
/**
* @dev Returns the downcasted int144 from int256, reverting on
* overflow (when the input is less than smallest int144 or
* greater than largest int144).
*
* Counterpart to Solidity's `int144` operator.
*
* Requirements:
*
* - input must fit into 144 bits
*/
function toInt144(int256 value) internal pure returns (int144 downcasted) {
downcasted = int144(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(144, value);
}
}
/**
* @dev Returns the downcasted int136 from int256, reverting on
* overflow (when the input is less than smallest int136 or
* greater than largest int136).
*
* Counterpart to Solidity's `int136` operator.
*
* Requirements:
*
* - input must fit into 136 bits
*/
function toInt136(int256 value) internal pure returns (int136 downcasted) {
downcasted = int136(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(136, value);
}
}
/**
* @dev Returns the downcasted int128 from int256, reverting on
* overflow (when the input is less than smallest int128 or
* greater than largest int128).
*
* Counterpart to Solidity's `int128` operator.
*
* Requirements:
*
* - input must fit into 128 bits
*/
function toInt128(int256 value) internal pure returns (int128 downcasted) {
downcasted = int128(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(128, value);
}
}
/**
* @dev Returns the downcasted int120 from int256, reverting on
* overflow (when the input is less than smallest int120 or
* greater than largest int120).
*
* Counterpart to Solidity's `int120` operator.
*
* Requirements:
*
* - input must fit into 120 bits
*/
function toInt120(int256 value) internal pure returns (int120 downcasted) {
downcasted = int120(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(120, value);
}
}
/**
* @dev Returns the downcasted int112 from int256, reverting on
* overflow (when the input is less than smallest int112 or
* greater than largest int112).
*
* Counterpart to Solidity's `int112` operator.
*
* Requirements:
*
* - input must fit into 112 bits
*/
function toInt112(int256 value) internal pure returns (int112 downcasted) {
downcasted = int112(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(112, value);
}
}
/**
* @dev Returns the downcasted int104 from int256, reverting on
* overflow (when the input is less than smallest int104 or
* greater than largest int104).
*
* Counterpart to Solidity's `int104` operator.
*
* Requirements:
*
* - input must fit into 104 bits
*/
function toInt104(int256 value) internal pure returns (int104 downcasted) {
downcasted = int104(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(104, value);
}
}
/**
* @dev Returns the downcasted int96 from int256, reverting on
* overflow (when the input is less than smallest int96 or
* greater than largest int96).
*
* Counterpart to Solidity's `int96` operator.
*
* Requirements:
*
* - input must fit into 96 bits
*/
function toInt96(int256 value) internal pure returns (int96 downcasted) {
downcasted = int96(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(96, value);
}
}
/**
* @dev Returns the downcasted int88 from int256, reverting on
* overflow (when the input is less than smallest int88 or
* greater than largest int88).
*
* Counterpart to Solidity's `int88` operator.
*
* Requirements:
*
* - input must fit into 88 bits
*/
function toInt88(int256 value) internal pure returns (int88 downcasted) {
downcasted = int88(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(88, value);
}
}
/**
* @dev Returns the downcasted int80 from int256, reverting on
* overflow (when the input is less than smallest int80 or
* greater than largest int80).
*
* Counterpart to Solidity's `int80` operator.
*
* Requirements:
*
* - input must fit into 80 bits
*/
function toInt80(int256 value) internal pure returns (int80 downcasted) {
downcasted = int80(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(80, value);
}
}
/**
* @dev Returns the downcasted int72 from int256, reverting on
* overflow (when the input is less than smallest int72 or
* greater than largest int72).
*
* Counterpart to Solidity's `int72` operator.
*
* Requirements:
*
* - input must fit into 72 bits
*/
function toInt72(int256 value) internal pure returns (int72 downcasted) {
downcasted = int72(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(72, value);
}
}
/**
* @dev Returns the downcasted int64 from int256, reverting on
* overflow (when the input is less than smallest int64 or
* greater than largest int64).
*
* Counterpart to Solidity's `int64` operator.
*
* Requirements:
*
* - input must fit into 64 bits
*/
function toInt64(int256 value) internal pure returns (int64 downcasted) {
downcasted = int64(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(64, value);
}
}
/**
* @dev Returns the downcasted int56 from int256, reverting on
* overflow (when the input is less than smallest int56 or
* greater than largest int56).
*
* Counterpart to Solidity's `int56` operator.
*
* Requirements:
*
* - input must fit into 56 bits
*/
function toInt56(int256 value) internal pure returns (int56 downcasted) {
downcasted = int56(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(56, value);
}
}
/**
* @dev Returns the downcasted int48 from int256, reverting on
* overflow (when the input is less than smallest int48 or
* greater than largest int48).
*
* Counterpart to Solidity's `int48` operator.
*
* Requirements:
*
* - input must fit into 48 bits
*/
function toInt48(int256 value) internal pure returns (int48 downcasted) {
downcasted = int48(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(48, value);
}
}
/**
* @dev Returns the downcasted int40 from int256, reverting on
* overflow (when the input is less than smallest int40 or
* greater than largest int40).
*
* Counterpart to Solidity's `int40` operator.
*
* Requirements:
*
* - input must fit into 40 bits
*/
function toInt40(int256 value) internal pure returns (int40 downcasted) {
downcasted = int40(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(40, value);
}
}
/**
* @dev Returns the downcasted int32 from int256, reverting on
* overflow (when the input is less than smallest int32 or
* greater than largest int32).
*
* Counterpart to Solidity's `int32` operator.
*
* Requirements:
*
* - input must fit into 32 bits
*/
function toInt32(int256 value) internal pure returns (int32 downcasted) {
downcasted = int32(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(32, value);
}
}
/**
* @dev Returns the downcasted int24 from int256, reverting on
* overflow (when the input is less than smallest int24 or
* greater than largest int24).
*
* Counterpart to Solidity's `int24` operator.
*
* Requirements:
*
* - input must fit into 24 bits
*/
function toInt24(int256 value) internal pure returns (int24 downcasted) {
downcasted = int24(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(24, value);
}
}
/**
* @dev Returns the downcasted int16 from int256, reverting on
* overflow (when the input is less than smallest int16 or
* greater than largest int16).
*
* Counterpart to Solidity's `int16` operator.
*
* Requirements:
*
* - input must fit into 16 bits
*/
function toInt16(int256 value) internal pure returns (int16 downcasted) {
downcasted = int16(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(16, value);
}
}
/**
* @dev Returns the downcasted int8 from int256, reverting on
* overflow (when the input is less than smallest int8 or
* greater than largest int8).
*
* Counterpart to Solidity's `int8` operator.
*
* Requirements:
*
* - input must fit into 8 bits
*/
function toInt8(int256 value) internal pure returns (int8 downcasted) {
downcasted = int8(value);
if (downcasted != value) {
revert SafeCastOverflowedIntDowncast(8, value);
}
}
/**
* @dev Converts an unsigned uint256 into a signed int256.
*
* Requirements:
*
* - input must be less than or equal to maxInt256.
*/
function toInt256(uint256 value) internal pure returns (int256) {
// Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive
if (value > uint256(type(int256).max)) {
revert SafeCastOverflowedUintToInt(value);
}
return int256(value);
}
/**
* @dev Cast a boolean (false or true) to a uint256 (0 or 1) with no jump.
*/
function toUint(bool b) internal pure returns (uint256 u) {
assembly ("memory-safe") {
u := iszero(iszero(b))
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (token/ERC20/extensions/IERC20Permit.sol)
pragma solidity ^0.8.20;
/**
* @dev Interface of the ERC-20 Permit extension allowing approvals to be made via signatures, as defined in
* https://eips.ethereum.org/EIPS/eip-2612[ERC-2612].
*
* Adds the {permit} method, which can be used to change an account's ERC-20 allowance (see {IERC20-allowance}) by
* presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
* need to send a transaction, and thus is not required to hold Ether at all.
*
* ==== Security Considerations
*
* There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
* expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
* considered as an intention to spend the allowance in any specific way. The second is that because permits have
* built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
* take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
* generally recommended is:
*
* ```solidity
* function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
* try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
* doThing(..., value);
* }
*
* function doThing(..., uint256 value) public {
* token.safeTransferFrom(msg.sender, address(this), value);
* ...
* }
* ```
*
* Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
* `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
* {SafeERC20-safeTransferFrom}).
*
* Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
* contracts should have entry points that don't rely on permit.
*/
interface IERC20Permit {
/**
* @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
* given ``owner``'s signed approval.
*
* IMPORTANT: The same issues {IERC20-approve} has related to transaction
* ordering also apply here.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `deadline` must be a timestamp in the future.
* - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
* over the EIP712-formatted function arguments.
* - the signature must use ``owner``'s current nonce (see {nonces}).
*
* For more information on the signature format, see the
* https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
* section].
*
* CAUTION: See Security Considerations above.
*/
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
/**
* @dev Returns the current nonce for `owner`. This value must be
* included whenever a signature is generated for {permit}.
*
* Every successful call to {permit} increases ``owner``'s nonce by one. This
* prevents a signature from being used multiple times.
*/
function nonces(address owner) external view returns (uint256);
/**
* @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
*/
// solhint-disable-next-line func-name-mixedcase
function DOMAIN_SEPARATOR() external view returns (bytes32);
}